|
Post by BIG chief on Mar 9, 2010 22:00:12 GMT -5
why not have a hose made with the chevy pump end and the jeep box end?
|
|
|
Post by cousinmike on Mar 10, 2010 23:40:45 GMT -5
Where?
|
|
|
Post by chevtech on Mar 11, 2010 0:14:59 GMT -5
The best place I know is Oil Filter Service in Portland.
|
|
|
Post by BIG chief on Mar 11, 2010 21:39:58 GMT -5
here in salim its marions auto service/millers custom hoses
|
|
|
Post by cousinmike on Mar 12, 2010 10:27:06 GMT -5
Here's the front half of the body. Just need to trim it to length to fit and fab up mounting points. Here's the steering column mounted to the roll cage Ordered the fuel cell, radiator and wilwood master cylinder peddle brake assembly.
|
|
|
Post by cousinmike on Mar 26, 2010 14:24:00 GMT -5
Figure I can run some big tires without the body skin and use it like a trail buggy too. Removed damaged CJ2A cowling CJ2A and the CJ3B cowling to be installed CJ3B cowling installed The CJ3B cowlings are 4-3/4” taller than the CJ2&3A’s and it didn’t look like I wanted to I cut it down leaving it 2” taller than the old cowling Radiator mounted along with front roll cage section Brake peddal and master cylinder installed along with support frame and fire wall
|
|
|
Post by Brennerbadboy on Mar 26, 2010 15:16:19 GMT -5
nice work...............keep it up
|
|
|
Post by possumpieces on Mar 26, 2010 18:39:16 GMT -5
Nice work. I like it!!!
|
|
|
Post by mudslinger97117 on Mar 26, 2010 21:01:39 GMT -5
oooooohhhhhh...... awwwwwww....... looks great
|
|
|
Post by cousinmike on Apr 6, 2010 0:16:12 GMT -5
Looking for an Art Carr or Cheetah shifter for the TH350 if anyone has one. We'll be looking at the Portland swap meet this weekend as well.
|
|
|
Post by cousinmike on May 4, 2010 9:35:03 GMT -5
|
|
|
Post by cousinmike on May 12, 2010 22:34:30 GMT -5
I thought the rattle can bed liner would be durable. It is chipping pretty easy when I bumped it with the end of a wrench while putting the jeep back together.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 13, 2010 13:44:03 GMT -5
I like it And yeah, that stuff chips. Try rubberized undercoat
|
|
|
Post by cousinmike on May 13, 2010 18:11:23 GMT -5
Think I might just paint over the chips for now and be more careful with the rest. At least until I get it in the woods. Hopefull it does not get too bad.
|
|