|
Post by popeye on Apr 19, 2006 11:21:50 GMT -5
So what are the plans for every one's wheeler?
Mine include a new engine, tranny and a little interior work for my 79' full size bronco. i all ready have the tranny rebuilt ready to go in. some parts for the new engine but some issue's took the money to finish it for a little while.
for jackass it will be another year of trying to kill it
|
|
|
Post by poorboy1 on Apr 19, 2006 13:21:02 GMT -5
Well Bigblock goes in monday-tuesday, one ton drivelines, zero rates, and then next year if I win the lotto coil overs.
|
|
|
Post by popeye on Apr 20, 2006 3:31:27 GMT -5
soooo nobody is going to upgrade anything or fix nutten
|
|
|
Post by MudHog on Apr 20, 2006 7:55:34 GMT -5
i should be doin cam and lifters in next few months
|
|
|
Post by yamxer438 on Apr 20, 2006 10:29:59 GMT -5
i get my third members back fri, so that will add detroits f/r, plans after that are 4 wheel disk, and then if i save my pennies right dual transfers. the motor has a knock so im sure one of those is in the near future.
|
|
|
Post by shane74 on Apr 21, 2006 0:48:03 GMT -5
Ok, here goes...
If I can get a chance to work on my own rig here is what is happening with it...
1. swap in 454 2. install front suspension (6" ez-rides in the front w/ a 1" 0-rate and 1" extended shackle) 3. install rear suspension, 2" ez-rides w/ 4" shackle flip & 1" 0-rate 4. 1410 rear driveline 5. 1350 front square d-shaft 6. find some 17x10 wheels for my 39.5 pit bulls 7. install above wheels/tires 8. full internal cage w/ shear pin plates and integrated suspension seats & 5 way harnesses 9. custom rear bumper w/ swing away tire/fuel/hi-lift carrier 10. custom front bumper w/ winch mount & small stinger 11. 12500 winch w/ wireless remote 12. custom sliders 13. build rear 14BFF (4.88's detroit, disc brake conversion) 14. Build front D44 (chromo shafts, super joints, detroit, 4.88's) 15. rear shock relocation (inboard for more flex 16. hydro assist 17. viper line tub interior 18. finally wheel the fawker!
All not necessarily in that order. I have most of the parts to build it, I just need the time.
|
|
|
Post by popeye on Apr 21, 2006 3:02:29 GMT -5
that is quit a list
|
|
gopher
axle snapper
scrapped suburban
Posts: 144
|
Post by gopher on Apr 21, 2006 9:18:35 GMT -5
Long term is to pick up a crappy, used TJ sometime next year. Short term is to save up the cash...
|
|
|
Post by blazerboy on Apr 22, 2006 18:06:35 GMT -5
I am actually working on a solid axle swap for my 80 full size bronco. then i want to get some tube and finally use that christmas present from two ago and bend some tube up for a bumper or two and maybe some doors. then who knows will prob do the body swap on the blazer and that's as far as I have planned. Will do a write up on the axle swap when it get's done
|
|
|
Post by Leeland on Apr 23, 2006 23:05:27 GMT -5
I just wanna hurry up and get my th350/np203 out and my sm465/np205 in, My tranny starting to cavitate pretty bad.
|
|
|
Post by wotpos on Apr 23, 2006 23:11:06 GMT -5
start removing junk out of driveway
|
|
|
Post by ReBeL on Apr 24, 2006 1:23:38 GMT -5
well looks as though got the bronco running needed a freash set of eyes so it is alive with out a moter swap need to figer out how to stop my rear axel from twisting and eating up rear ujoints. and I am sure I will find my next project it need at sand lake next mounth
|
|
MOONER
axle snapper
Tacoma, Wa
Posts: 125
|
Post by MOONER on Apr 24, 2006 11:42:50 GMT -5
well my '78 bronco gonna get a full rollcage 460 needs to be put back together and drivelines and transfercase installed
'84 f150 gonna get rollcage and needs wire issued fixed
|
|
ponyboy
lil wheeler
BrokeBastard
Posts: 25
|
Post by ponyboy on May 3, 2006 18:51:00 GMT -5
My 76 Chev needs new tires,,,,,,
My wife's 76 GMC needs the 14bolt welded Cage started And "TINKERBELL" JB welded to the dash
|
|
TODD
axle snapper
shelbydog
Posts: 176
|
Post by TODD on May 4, 2006 17:39:03 GMT -5
I'm geting a hard-on just reading all this I'm on hold until I'm working fultime so if you need your gears done call me or p.m.
|
|