|
Post by chevtech on Nov 4, 2010 20:34:07 GMT -5
finally going to do the rear disc conversion Nice, makes a big difference!
|
|
|
Post by possumpieces on Nov 4, 2010 21:01:25 GMT -5
went and picked up a dual fuel propane set up today from pat (tonka) just have to figure out how to hook it all up. also pick up some of my rear disc conversion parts from him wile i was out there. I was wandering how your dual fuel set up went. Did you get it done? Does it have good power with both fuels? Concidering this for my motor home, but not sure if you get good power with the propane portion....?
|
|
|
Post by CRAZY BASTARD on Nov 4, 2010 21:11:06 GMT -5
went and picked up a dual fuel propane set up today from pat (tonka) just have to figure out how to hook it all up. also pick up some of my rear disc conversion parts from him wile i was out there. I was wandering how your dual fuel set up went. Did you get it done? Does it have good power with both fuels? Concidering this for my motor home, but not sure if you get good power with the propane portion....? no been working too much havnt had time to mess with the propane set up yet.
|
|
|
Post by CRAZY BASTARD on Nov 8, 2010 23:34:45 GMT -5
disc breaks are done also removed three leafs out of each rear spring pack, added a set of zero rates to relevel it and move the rear axle back another 1.5inches.
|
|
|
Post by poorboy1 on Nov 8, 2010 23:39:57 GMT -5
do you have something to control the axle from rotating?
|
|
|
Post by CRAZY BASTARD on Nov 9, 2010 0:03:59 GMT -5
it still has 5 leafs in the pack so i am hoping wrap wont be an issuse if it is then i will add the overload back in
|
|
|
Post by poorboy1 on Nov 9, 2010 10:50:09 GMT -5
I originally put my overload in upside down so it would flex a lil more and still would keep it from wrapping too bad.
|
|
|
Post by CRAZY BASTARD on Feb 26, 2011 20:07:34 GMT -5
So i blew up the front diff, finally got it put back together now just need to change the oil and tranny filter.
|
|
|
Post by CRAZY BASTARD on Mar 19, 2011 22:59:13 GMT -5
New front did cover all painted up
|
|
|
Post by CRAZY BASTARD on Mar 22, 2011 18:33:36 GMT -5
New hydro ram mount
|
|
|
Post by CRAZY BASTARD on Mar 23, 2011 23:09:49 GMT -5
|
|
|
Post by chevtech on Mar 23, 2011 23:40:36 GMT -5
Sweet!
|
|
|
Post by Jonny tsunami on Mar 24, 2011 7:09:24 GMT -5
so did you have to get your front axle straitened??
|
|
|
Post by poorboy1 on Mar 24, 2011 11:30:44 GMT -5
Should be protected good up there. No worries of it hitting the crossmember?
|
|
|
Post by CRAZY BASTARD on Mar 24, 2011 18:05:38 GMT -5
If it hits ill just build a new one but It looks like it has plenty of room. The cross members on the blazer are a little bit shorter then on a pickup.
|
|