|
Post by CRAZY BASTARD on Jan 26, 2009 8:44:52 GMT -5
so this is what a bought with some of the money from my 66 it is a 79 k-5 got a sb400-turbo350 and a 205 Dana 60 front and rear dura lined tub with nice wrap around racing bucket seats got a little tinkering to do and buy some tires and should be ready for sb5. will post up some pics tonight.
|
|
|
Post by junkyard dog on Jan 26, 2009 12:15:41 GMT -5
sounds good..... get some pics up of that thing!!
|
|
|
Post by CRAZY BASTARD on Jan 26, 2009 20:38:40 GMT -5
|
|
|
Post by CRAZY BASTARD on Jan 26, 2009 20:53:33 GMT -5
here are a couple from before i got it YEE HAA
|
|
|
Post by poorboy1 on Jan 26, 2009 22:21:49 GMT -5
you better look at the frame right in front of the tub behind the front tires. Havent seen a blazer take that abuse yet without tweeking the frame. Other than that cool.
|
|
|
Post by CRAZY BASTARD on Jan 26, 2009 22:47:40 GMT -5
i know where there is another frame this one looks ok will see when i start tearing in to it mainly got it for the running gear and tub.
|
|
|
Post by Jonny tsunami on Jan 26, 2009 23:05:10 GMT -5
looks nice I would find some hummer bead locks and just bolt um on there. It looks as if it flies nice hope to see it catch some air at sb5.
|
|
|
Post by Crusty on Jan 26, 2009 23:14:14 GMT -5
He has ran that at the Clark County Fair for the past 3 years, THAT THINK HAS TAKIN A BEATING!!!! The front axle isn't bent?? It use to say corrections and have a light bar on it.
|
|
|
Post by MudHog on Jan 26, 2009 23:21:40 GMT -5
i seen that rig on craigslist,but it didnt have tires or rims on it in the pic
|
|
|
Post by CRAZY BASTARD on Jan 26, 2009 23:31:36 GMT -5
looks nice I would find some hummer bead locks and just bolt um on there. It looks as if it flies nice hope to see it catch some air at sb5. thats my plan for wheels just have to see if i can find some.
|
|
|
Post by CRAZY BASTARD on Jan 26, 2009 23:33:36 GMT -5
He has ran that at the Clark County Fair for the past 3 years, THAT THINK HAS TAKIN A BEATING!!!! The front axle isn't bent?? It use to say corrections and have a light bar on it. the one he bent was a 10 bolt this one is not bent as far as i can tell. he did not run it with this front end in it.
|
|
|
Post by poorboy1 on Jan 26, 2009 23:37:31 GMT -5
hopefully it is good. being the half top it has a little more strength but just take a peek about where the front spring shackles are, right in there it starts to bend when hammered on.
|
|
|
Post by junkyard dog on Jan 26, 2009 23:38:30 GMT -5
x2 on the frame.... gap on front of door looks uneven
|
|
|
Post by Broncotrav on Jan 27, 2009 14:02:02 GMT -5
Stave , looks like a nice snag there. Even if its been ran hard. Youve had enough chevys to know all the chronic spots I think.
|
|
|
Post by CRAZY BASTARD on Jan 27, 2009 19:20:12 GMT -5
Stave , looks like a nice snag there. Even if its been ran hard. Youve had enough chevys to know all the chronic spots I think. good call dont think i have ever jumped on before though ha ha ha. if it is bent got another frame for free today so no worrys.
|
|