|
Post by poorboy1 on Mar 11, 2010 7:55:11 GMT -5
finally an update, looking good. looks like a 12voltguy panel.
|
|
|
Post by Brennerbadboy on Mar 11, 2010 10:40:45 GMT -5
nick its looking good, looks like it will lay on its side with no problems JK keep up the good work
|
|
|
Post by 77oneton on Mar 11, 2010 15:30:25 GMT -5
skid plate mounted, and works awesome, had to test it on some stumps. thanks steve
|
|
|
Post by 77oneton on Mar 11, 2010 15:32:39 GMT -5
yeah it's a 12 volt guy panel. that thing is awesome, and super simple. i would reccomend his products to anyone!
|
|
|
Post by 77oneton on Mar 11, 2010 15:36:46 GMT -5
pretty much done with wiring, except taillights, and i have to plug in the kc's and rock lights.
|
|
|
Post by 77oneton on Mar 11, 2010 15:39:22 GMT -5
cage is all finish welded also, thanks to Josh and his patience all except one diag brace i still have to bend.
|
|
|
Post by Rock Dawg on Mar 11, 2010 18:59:32 GMT -5
Looking great my friend. Now you just need to 4 link it and you will be ready for Maob ;-)..
|
|
|
Post by 77oneton on Mar 12, 2010 15:30:09 GMT -5
no need for 4 link right now, i have to limit the leaf springs.
|
|
|
Post by 77oneton on Mar 17, 2010 15:12:06 GMT -5
("Bill the rear lights are the ones i was tellin you about") front rock lights rear (blurry pic) also broke down my rims finally. to finish the rock rings and cut the inserts
|
|
|
Post by 77oneton on Mar 17, 2010 15:18:46 GMT -5
bad pics, but here's the wrap bar i put in. should be longer and closer to the center, but with the cj frame and a sb inside this was the only spot i could fit it. and it needed one BAD! so far it works pretty well, i left the long side on the bottom so i had down travel. it's built out of the lower half of a blazer driveline. with a heim on top, hooked into a trailgear creeper joint. it moves side to side well, and allows a little slip on down travel and the heim turns to allow rotation!
|
|
|
Post by 77oneton on Mar 17, 2010 15:25:40 GMT -5
|
|
|
Post by Buzzer on Mar 17, 2010 15:41:05 GMT -5
looking sweet.....
glad we got a new blade to cut those run flats!
|
|
|
Post by chevtech on Mar 17, 2010 17:21:19 GMT -5
I guess it flexes ok. All the teeth are already gone off of the new blade, it was too fine and they came off when I was cutting tubing last night.
|
|
|
Post by 77oneton on Mar 18, 2010 0:23:23 GMT -5
no,way! it was a 14tpi and you must have had a 10 or12. it cant make that much difference.
|
|
|
Post by chevtech on Mar 18, 2010 1:06:00 GMT -5
I bought another 14tpi, we'll see how it works.
|
|