|
Post by BIG chief on Jul 27, 2009 14:57:23 GMT -5
i know its freakin hot and most of us work during the week but im tryin to get the engines in my blazers swapped out before thursday afternoon, i only have today and thursday to do it. i cant really offer much for the help but i can keep you hydrated and an air conditioned house to cool off in occasionally. i almost have one motor out just need to pull other motor and swap heads then put the motor back in one of them. any help would be greatly appreciated and as of now compensation would be food and drinks but not beer at least not till we are done, im in salem kinda over by lancaster mall
give me a call if you can/will come help me out, shawn 503 798 7808
and my friend that was supposed to come help me and bring a torque wrench bailed on me so if you can bring a torque wrench that would be a plus, if not i can get one just didnt wanna really leave till i could be done with my blazers
|
|
|
Post by BIG chief on Jul 27, 2009 23:28:35 GMT -5
well i got one motor out today and i was dyin from the heat , took a 4 hour break from 2:30 till 6:30 then just now wrappin things up. wont be able to do much till thursday since i wont be getting home till 7:30 for the next 2 days but if ANYONE can come help me on thursday it would be greatly appreciated i will probably be gettin started around 6:30-7 A.M. so if anyone can help give me a call or come on by, i live in salem if you want to help pm me for my address
|
|
|
Post by The Black Jeep on Jul 29, 2009 14:28:07 GMT -5
I know what it's like to work in the hot sun, we've been busy at Schwabs doing bearing packs on lots of trailers. Some of them are too large to stick in the shop were it's shaded. Good luck on gettin that in, hope you get someone to help. I've been busy helping other friends up here with their vehicles that have broke down.
|
|
|
Post by BIG chief on Jul 30, 2009 10:08:33 GMT -5
well im workin on it now so if anyone wants to come help give me a call 503 798 7808
|
|
|
Post by BIG chief on Jul 30, 2009 16:51:53 GMT -5
well i had about an hour of help earlier this morning which helped my progress a little bit but i just got the motor out of the other one now i just need to do some head swappin and put one back in my good blazer
|
|
|
Post by BIG chief on Jul 31, 2009 1:11:18 GMT -5
heads swapped and engine back in and bolted down and then it got dark b4 i could finish up and its a bit late to be runnin air tools and makin all my noise didnt get it done today as i had hoped but hopefully get it finished early tomorrow so i can still go play this weekend
|
|
|
Post by BIG chief on Jul 31, 2009 15:22:06 GMT -5
its done finally and sounds good now no more knockin yay
|
|
|
Post by BIG chief on Aug 1, 2009 2:00:36 GMT -5
so i thought everything was all good but i think i have an ignition module problem, has left me not starting a couple times today, will figure it out tomorrow just got it towed home now so goin to bed.
jason if you want you can put this all under my build page if thats possible?
|
|
|
Post by poorboy1 on Aug 1, 2009 10:33:04 GMT -5
I can move the thread but don't think it can go into another thread.
What is your no starting issue? Cranks but no fire? Or no nothing when you key up? .
|
|
|
Post by BIG chief on Aug 1, 2009 13:23:26 GMT -5
cranks no fire pretty sure its an ignition module but its kinda hard to diagnose with nobody to help and not being at home anyways, im gonna see if the computer has any codes first then i start testings stuff, checkin for spark,fuel yadda yadda yadda
|
|