|
Post by poorboy1 on May 27, 2009 22:44:36 GMT -5
supposedly lowered cylinder temps to stop predetonation with lower octane fuel and more advance spark or some shit. couldnt be to good or it would be on all your junk now.
|
|
|
Post by poorboy1 on May 27, 2009 23:17:57 GMT -5
me and justin got the interior stripped and the trunk stripped along with the rear tail lights. Still need to pull the windshield and rear glass.
|
|
|
Post by mudslinger97117 on May 28, 2009 0:29:45 GMT -5
I say Scary Canary II ..... Then again I always wanted to put the old Powell skateboard Co. Ripper on a derby. He's a scelton ripping through the deck.
|
|
|
Post by bleakhorizon on May 28, 2009 14:47:49 GMT -5
i like the number 28's paint job, i was thinking something like that on my runner, i did one in the past on a friends rabbit that was a jigsaw puzzle and in the rear was falling apart, DAMN that was a sweet paint job....... Anyway im not going to embed it here (no threadjacking here lol)but here is a car that i worked on for the derby in 06 here in Tillamook. i didnt drive this one but he did really good considering he had never even seen a demo derby before www.youtube.com/watch?v=oh7QgKyOdl0
|
|
|
Post by poorboy1 on May 28, 2009 20:42:01 GMT -5
i didnt get a chance to do much. i did dump a little gas down the carb and it fired right off so thats good news.
|
|
Outlawford
trail master
GOT TUBE DOORS?
Posts: 552
|
Post by Outlawford on May 29, 2009 13:58:57 GMT -5
Let me or charlie know if you need some odd and end parts. Will help out with what we can from our yard.
|
|
|
Post by poorboy1 on May 29, 2009 15:40:30 GMT -5
Awesome, so far just spare tires and maybe a radiator.
|
|
|
Post by popeye on May 29, 2009 17:21:16 GMT -5
Awesome, so far just spare tires and maybe a radiator. i have a radiator out of a ford truck, but im sure its the wrong style if not its yours got a bunch of tires also if you tell me what size i will see what i got
|
|
|
Post by poorboy1 on May 29, 2009 17:28:23 GMT -5
Are they car tires?
The radiator just needs to have the correct water outlets. Size doesn't matter. I'm sure rich has a few. Its just for a spare
|
|
|
Post by Brennerbadboy on May 31, 2009 20:05:28 GMT -5
anay updates on the derbey car???
|
|
|
Post by chevtech on May 31, 2009 21:24:14 GMT -5
I have a couple of full size radiators, both from chevys, so let us know what size you need and what position you need the water outlets.
|
|
|
Post by poorboy1 on May 31, 2009 22:54:30 GMT -5
they would need to be ford outlets. upper pass and lower drivers.
we just finished another engine swap in justins truck, so now we can push the car back into teh shop and keep workin on it. I did toss in a vhs of some of my old derbys to set the mood.
|
|
|
Post by popeye on May 31, 2009 23:18:40 GMT -5
Are they car tires? The radiator just needs to have the correct water outlets. Size doesn't matter. I'm sure rich has a few. Its just for a spare car/truck tires tell me what size and ill look to see
|
|
|
Post by poorboy1 on May 31, 2009 23:45:59 GMT -5
|
|
|
Post by poorboy1 on Jun 1, 2009 22:42:32 GMT -5
got the windshield out and started stripping the engine bay. a/c pump and plumbing is gone along with 10 feet of vacuum line.
|
|