|
|
73 F250
Feb 17, 2008 22:09:52 GMT -5
Post by Buzzer on Feb 17, 2008 22:09:52 GMT -5
taxes came in today.... Got the belt and front diff fluid Got the front Hubs done and yes i oiled the hubs before i put them in.... I have 4WD nowpart of the old hubs were froze up.... even though you could turn it from free to locked.... it wouldn't engage... and the WARNS fit...  I know better ...i didn't oil them... there greased......lol      I also cut the rear fenders, from the tires back......loss 4-5" now the frame is the lowest point back there...  |
|
|
|
73 F250
Feb 17, 2008 22:24:16 GMT -5
Post by possumpieces on Feb 17, 2008 22:24:16 GMT -5
Looks like you could of tried cleaning them. They might of worked. The new ones look sweet though.
|
|
|
|
73 F250
Feb 17, 2008 22:34:32 GMT -5
Post by WILLYNILLY on Feb 17, 2008 22:34:32 GMT -5
Wow those things look like they were packed with frosting instead of greese!! Nice to have the four wheel drive up and going again!
|
|
|
|
73 F250
Feb 18, 2008 11:43:08 GMT -5
Post by The Black Jeep on Feb 18, 2008 11:43:08 GMT -5
Back of the truck looks GREAT!....nice job  |
|
|
|
73 F250
Feb 18, 2008 13:35:51 GMT -5
Post by WILLYNILLY on Feb 18, 2008 13:35:51 GMT -5
Do your lift blocks have tabs that keep them from wanting to slip out? I have never seen that, but its a cool idea!
|
|
|
|
73 F250
Feb 18, 2008 14:43:27 GMT -5
Post by ReBeL on Feb 18, 2008 14:43:27 GMT -5
Do your lift blocks have tabs that keep them from wanting to slip out? I have never seen that, but its a cool idea! this is factroy on the high boys and they do have the pins in the blocks hay bill might i sugest to try and clean the old hubs just for spars if you deside to let me know I will grade you some desile the next time i fuel up the simi and you can clean and soak the huds in it to see if they will clean up and start working agian dont hert to have spars |
|
|
|
73 F250
Feb 18, 2008 15:47:15 GMT -5
Post by Buzzer on Feb 18, 2008 15:47:15 GMT -5
no.. those tabs were on my ranger too(pic below).... i'll have to go out and check, but i think there for the bump stops.... sure Marv... get some diesal... couldn't hurt....  |
|
|
|
73 F250
Feb 18, 2008 16:40:25 GMT -5
Post by WILLYNILLY on Feb 18, 2008 16:40:25 GMT -5
ahh now I can see how it would hit your bump stops.
|
|
|
|
73 F250
Feb 18, 2008 21:22:04 GMT -5
Post by popeye on Feb 18, 2008 21:22:04 GMT -5
those are stock on ford trucks. the bolts go thru the blocks also
|
|
|
|
73 F250
Feb 18, 2008 21:35:24 GMT -5
Post by Buzzer on Feb 18, 2008 21:35:24 GMT -5
those are stock on ford trucks. the bolts go thru the blocks also actually they don't on the F250s... the ones that came off the f250 had nubs and pockets for perfect placement....i'll grab a pic...  |
|
|
|
73 F250
Feb 19, 2008 5:02:24 GMT -5
Post by The Black Jeep on Feb 19, 2008 5:02:24 GMT -5
Do your lift blocks have tabs that keep them from wanting to slip out? I have never seen that, but its a cool idea! this is factroy on the high boys and they do have the pins in the blocks hay bill might i sugest to try and clean the old hubs just for spars if you deside to let me know I will grade you some desile the next time i fuel up the simi and you can clean and soak the huds in it to see if they will clean up and start working agian dont hert to have spars Just drop them in your diesel tank and let them rattle around for a month...would be like a rock polisher....LOL....jk |
|
|
|
73 F250
Feb 19, 2008 7:47:44 GMT -5
Post by Buzzer on Feb 19, 2008 7:47:44 GMT -5
|
|
|
|
73 F250
Feb 23, 2008 17:17:29 GMT -5
Post by Buzzer on Feb 23, 2008 17:17:29 GMT -5
ok got the steering fixed today.... trimmed the front fender a bit had a prob/with the fuel pump... fixed that marv droped me of a couple use semi flaps.. i can hack up into some mud flaps and installed the tow hook Pat gave me from a semi for the most part... i think i'm done...(it's a Ford...i'll never be done)   tow hook from Pat..  |
|
|
|
73 F250
Feb 25, 2008 22:33:41 GMT -5
Post by Buzzer on Feb 25, 2008 22:33:41 GMT -5
had the wife help me today install the rear slider window, that i had saved from the 76'.......I was trying to save the old glass to try and sell, no luck ....It shattered with in 10 mins of trying to get it out.... but this one looks much better...with new stickers.... Picked up a new (good) fuel pump, diff fluid, fog lights and installed the CB today  |
|
|
|
73 F250
Feb 26, 2008 9:17:18 GMT -5
Post by 96zjlarado on Feb 26, 2008 9:17:18 GMT -5
lookin good buzzman!
|
|
