|
|
73 F250
Jan 13, 2008 1:36:47 GMT -5
Post by fordman1978 on Jan 13, 2008 1:36:47 GMT -5
your truck is looking pretty good
|
|
|
|
73 F250
Jan 13, 2008 2:09:13 GMT -5
Post by Buzzer on Jan 13, 2008 2:09:13 GMT -5
Thanks.... painted a few more things for under the hood today (chevy orange)
Can't wait till next saturday when i get a bit more time to go out and work on it....
(tranny pan leak/ poss changing out the fuse box or soddering a couple wires that broke free in the back of the old 1/ really do need the gas gauge to work...lol(small detail)
I think when i do go out to test it out... i'll run over to wagon wheel(not in the water) and test there.....Closest place for me to go and test
|
|
|
|
73 F250
Jan 13, 2008 15:20:04 GMT -5
Post by Buzzer on Jan 13, 2008 15:20:04 GMT -5
|
|
|
|
73 F250
Jan 13, 2008 18:40:08 GMT -5
Post by WILLYNILLY on Jan 13, 2008 18:40:08 GMT -5
revive theneon blue of ur motor an ull be set!!!  lol jk. looks good! |
|
|
|
73 F250
Jan 25, 2008 20:15:54 GMT -5
Post by Buzzer on Jan 25, 2008 20:15:54 GMT -5
Ok...i hope the 3rd times a charm...
(sealing up the tranny pan)
got it pulled and acourse i painted it that bright Green.... so i can easily see any leaks....Sealed it and bolted it back up tomorrow i'll fill it and prey it doesn't leak....
|
|
|
|
73 F250
Jan 25, 2008 21:03:36 GMT -5
Post by WILLYNILLY on Jan 25, 2008 21:03:36 GMT -5
|
|
|
|
73 F250
Jan 26, 2008 23:34:09 GMT -5
Post by Buzzer on Jan 26, 2008 23:34:09 GMT -5
well.. it looks like the tranny seal is holding..... about time...lol
In the morning i'm going to check the fluids again and seal... and when it's warmed up, run it over to fill the tank.....
I have Chaz and Mudhog meeting me over at wagon wheel.... and give the thing some testing and see how it does..
Still have some minor electrical to do later (gas gauge/dash lights/turn singnals)
|
|
|
|
73 F250
Jan 26, 2008 23:41:31 GMT -5
Post by possumpieces on Jan 26, 2008 23:41:31 GMT -5
glad to hear it is on it's own power and mobile again. Maybe you will be able to take it on a run some time......LOL
|
|
|
|
73 F250
Jan 26, 2008 23:50:24 GMT -5
Post by Buzzer on Jan 26, 2008 23:50:24 GMT -5
was going to take it to the bbq, but with SB4 the following weekend...
hope to have AAA towing on it by then....lol so it makes it home.
|
|
Reaper
rock crusher
"Its not what you break, it is how fast you fix it"
Posts: 383
|
73 F250
Jan 27, 2008 3:19:46 GMT -5
Post by Reaper on Jan 27, 2008 3:19:46 GMT -5
We just got the diff back in the ranger and have to top off the gear oil in the morning and were ready to go...So just give me a call. hope it makes it there and back ok.  |
|
|
|
73 F250
Jan 27, 2008 17:55:16 GMT -5
Post by Buzzer on Jan 27, 2008 17:55:16 GMT -5
|
|
|
|
73 F250
Jan 27, 2008 17:58:22 GMT -5
Post by Buzzer on Jan 27, 2008 17:58:22 GMT -5
Possumpieces & PopeyeThanks for the use of the Jack stands and Jack, for doing the front axle!! The truck seemed to do well.. really need the steering finished/hubs replaced and some odds and ends done.. this should be done by SB4....    [/
|
|
|
|
73 F250
Jan 27, 2008 19:37:04 GMT -5
Post by WILLYNILLY on Jan 27, 2008 19:37:04 GMT -5
LOL snowman didnt hurt your grill did it? Funny clip!!
|
|
|
|
73 F250
Jan 27, 2008 19:43:07 GMT -5
Post by Buzzer on Jan 27, 2008 19:43:07 GMT -5
nope.... wish the 4wd was working it would have been rent hia diffrent hit on the snowman....(gone through the water first, then hit him)
|
|
|
|
73 F250
Jan 31, 2008 19:36:52 GMT -5
Post by Buzzer on Jan 31, 2008 19:36:52 GMT -5
 Started cleanning up the used hydraulic power asst. steering i got from u-pull... got only about 1/3 of the whole system cleanned-ran out of degreaser.... Nice and DIRTY Cleanned up...just needs a nice coat of paint...lmao |
|
