1974 GMC Jimmy

[BigRig4x4]

Here are some pictures of my most recent project. I just got the lift done today. Is has a stock 350/th350/NP203 w/o partime kit. 3.73:1 in the D44 front and 12B rear, both open. 6in suspension with 3in body. 38x12.5r15 Supwer Swamper TSL on 15x10 rock crawler wheel. I am going to be taking it out to TSF on March 5th to see how she does. Wheel it till she breaks, then I know what to fix. I will get more pictures up soon.

[poorboy1]

looks like it'll be fun to break. If'n ya have trouble breaking something let me know.

[BigRig4x4]

I want to take it easy at first so I know the major stuff is alright, after I know my axles wont fall off, then I can jump her. I have a couple extra sets of axle shafts.. I think I wont be to bad off. This is the first truck I have build from the ground up. I hope to do quite a bit more, but I did what I could with out putting any money into it.

[BigRig4x4]

I think I broke a hub, but it is hard to tell with it being an automatic locking hub, it clicks like it isnt all the way locked, but sometimes it works..

[poorboy1]

is it an autohub or full time hub?

[BigRig4x4]

auto hub, i think. But I could be wrong though..

[MudHog]

:-Xvery nice :-Xgotta love them action shots like that!!!!

[chevdawg77]

good chance your hubs are sticking, check the grease in the hub. as soon as you can you should put the part time kit in and install a good set of hubs. i twin sticked my 203 so that you can easily go into 4x4 in low or high with ease.

[BigRig4x4]

How hard and how much does it cost to twin stick a 203? is it kind of like doing the 203/205 combo?

[poorboy1]

twin sticking a 203 is very easy. Just need to make a shifter.

[gopher]

Looks quite a bit taller than last time I saw it.

Good job man.

[BigRig4x4]

Thank you John.. Couldnt do it with out your help.

[explorermunky]

hey that pic that you got in the mud water with snow and trees around you.. is that in esticada.. (goat mountain) ?
just wondering looks familiar. nice pics nice rig

-Jesse