|
Post by Ryans71Bronco on Jul 27, 2005 23:52:55 GMT -5
|
|
gopher
axle snapper
scrapped suburban
Posts: 144
|
Post by gopher on Jul 29, 2005 17:43:18 GMT -5
Lot of bumps and bruises...Looks fun
|
|
|
Post by poorboy1 on Jul 29, 2005 21:15:00 GMT -5
looks like ya tore it up.
|
|
|
Post by popeye on Jul 30, 2005 8:39:32 GMT -5
tore what up? that poor bronco? lol
|
|
|
Post by poorboy1 on Jul 30, 2005 9:39:16 GMT -5
that ol bronco looks rode hard and put away wet.
|
|
|
Post by BigRig4x4 on Aug 5, 2005 1:48:30 GMT -5
Im sure you had fun though, now you just have battle wounds. ~Shad
|
|
|
Post by Ryans71Bronco on Aug 13, 2005 0:24:26 GMT -5
The trail was pretty challenging, had a good time. I can get sheetmetal cheap at the swap meet. The doors I'm not worried about as I'm going with inserts & soft doors.
The shitty part are the dents in the rear corners. Those are spot welded on, where as the other pieces I can unbolt and replace easy.
Only had one mechanical breakdown. When I had my nose in that puddle the starter got soaked with mud and it would start. So I had to remove it, disassemble, rinse with clean water, reassemble and reinstall. The hardest part was getting those damn brushes back on the armature......
I'll go again, no problem.
Ryan.
|
|