|
Post by badshark on Oct 7, 2006 0:45:13 GMT -5
new here from florida looks like a fun club i have a 95 yj on 36's with a detroit in the rear 6 banger with spring over with 4:56's front an rear nuthin special its my daily driver so i try not ot break it
|
|
|
Post by Buzzer on Oct 7, 2006 1:40:47 GMT -5
[glow=green,2,300]Welcome!!![/glow]
check out the monthly runs (10-8-06) welcome to come!
|
|
|
Post by cards4me on Oct 7, 2006 1:47:23 GMT -5
Welcome to Poorboy!
|
|
|
Post by badshark on Oct 7, 2006 1:51:52 GMT -5
thanks seems like good folks here i have a rear drive shaft issue and seeing how my good friend / mechanic is in fl i need to find a place to get one made when we did the spring over my rear drive shaft is stretched to the limit and i am the first to admit i am not a mechanic which is bad with this hobby but i see a lot of spline which is gonna wory me till i get the correct size in there but i do love to 4x4 used to do a lot of mudding in fl and rocks in nc so oregon will be just fine
|
|
|
Post by poorboy1 on Oct 7, 2006 9:46:55 GMT -5
Welcome to poorboy. Oregon does it a lil different, we mix the mud with the rocks
|
|
|
Post by jeeplessjohn on Oct 7, 2006 10:33:59 GMT -5
there is a place called six states they can fix your drive shafts and if you need longer ones they can do that to
|
|
|
Post by badshark on Oct 7, 2006 11:15:15 GMT -5
coool they in tualatin ? or close ? btw i have a big garage most tools need and an air compressor so if ya need a place to work plus i have 7' doors heheh ye3ah im spoiled now i just need mechanical skills hahahaha
|
|
|
Post by jeeplessjohn on Oct 7, 2006 11:45:34 GMT -5
where at in tualatin i live on boones ferry rd and six states is in portland
|
|
|
Post by badshark on Oct 7, 2006 14:56:04 GMT -5
off jurgenson on sw kiowa
|
|
|
Post by MudHog on Oct 7, 2006 15:19:57 GMT -5
welcome to poorboy,,we have fun on the trails here,,hopefully we see ya on the trails soon
|
|
|
Post by badshark on Oct 7, 2006 17:46:24 GMT -5
hopefuly soon ! ! !
|
|
|
Post by jeeplessjohn on Oct 7, 2006 18:59:05 GMT -5
if you ever need any help on your jeep just let me know. but right now my truck is on its way to arizona for a week and when i get it back we will have to go wheelin
|
|
|
Post by badshark on Oct 8, 2006 3:00:49 GMT -5
sweet i am better on computers then mechanics but will probaly need help on the driveshaft issue so i dont order one thats shorter then what i have now hehe btw you cant miss the jeep it has a rim on the back with no tire on it gotta get that ordered next week
|
|
|
Post by mudslinger97117 on Oct 8, 2006 11:07:16 GMT -5
Welcome to POORBOY .. I would recomend a SYE kit if you already don't have one with 36's and a locked rear it will give you a lil' piece of mind. Since your already needing a shaft. I got mine offline the had portland driveline build me a shaft.
|
|
|
Post by badshark on Oct 8, 2006 12:54:05 GMT -5
got the sye was great till we did the spring over now i see alot of splines showing so im worried if i flex it will come apart my problem is like i said no mechanical ability rofl not even sure how to measure it right i am feeling better now i hooked up on this sight yall seem very cool i wanna go wheel up here just as soon as i get shaft replaced and new u joints on front shaft
|
|