|
Post by Jonny tsunami on Oct 23, 2013 22:13:15 GMT -5
going on Friday the 25th to get this done somewhere.
Anyone know of a place that can make me 2 hoses for a log splitter. there I think 3/4 size or so, need them to be a specific length. I have looked online and there are a few places in town to get it done just looking for a recommended place to get it done. maybe a cheaper place to go?
|
|
|
Post by blk01ram on Oct 24, 2013 8:44:25 GMT -5
I had Parker Hose out on 26 next to PSI make me one for my power steering from pump to box. Cost wasn't too bad, around $20-$30 if I remember. They made them in about 5 min.
|
|
|
Post by cousinmike on Oct 24, 2013 13:43:46 GMT -5
Industrial Product has put together alot of hoses for me. They usally get it done on the spot. 17380 Southwest Baseline Road Beaverton, OR 97006 (503) 645-0544
NAPA in Scappoose builds hoses, but not sure if the NAPA's in your area do.
Coastal Farm supply carries hydraulic hoses, but not sure if they carry the size your looking for.
Hope this helps
|
|
|
Post by Jonny tsunami on Oct 25, 2013 12:09:24 GMT -5
ok thanks guys, going to try industrial products cause its closer.
|
|
|
Post by Jonny tsunami on Oct 25, 2013 19:28:40 GMT -5
got my hoses, in like 15 mins there. replaced the two from the cylinder to the valve. went from a 4 inch to a 5 inch cylinder by accident ordered the wrong one but to much $$ to ship back so I'm going to use it anyways. its a tiny bit slower but its scary powerful. already broke a weld, going to have to use a bigger welder to put it together..
|
|
|
Post by CRAZY BASTARD on Oct 25, 2013 22:57:39 GMT -5
Bring it over and I'll burn it in for ya
|
|
|
Post by Jonny tsunami on Oct 26, 2013 17:45:21 GMT -5
Bring it over and I'll burn it in for ya send me a text I don't have your number in this phone and are you free Sunday for an hour or so.
|
|
|
Post by Brennerbadboy on Oct 27, 2013 11:26:34 GMT -5
JONNY, next time you need anything hyd. lines made ,fittings .A1 COUPLING TUALITIAN ,SHERWOOD ROAD TUALITAN THERE IN THE BOOK
|
|
|
Post by Jonny tsunami on Oct 27, 2013 18:50:25 GMT -5
Bring it over and I'll burn it in for ya Thanks Steve for burning all that in for me.
|
|
|
Post by studebaker on Oct 27, 2013 19:46:42 GMT -5
You can also get make your own hose and fittings to
|
|
|
Post by Jonny tsunami on Oct 27, 2013 21:08:13 GMT -5
You can also get make your own hose and fittings to yes I was talking with Steve on my hydro assist he showed me some of the build it your self fittings, I may go that rout for easy trail fixing.
|
|
|
Post by Jonny tsunami on Oct 27, 2013 21:10:28 GMT -5
split some wood works great. go a lot more to go.
|
|