|
|
Post by Dicenn on Mar 24, 2006 17:11:32 GMT -5
I hate that one bolt that just want come loose...  I want to change the oil in my t-case but the damn fill bolt won't come out... it was stripped now it is round... any one have one of those stripped bolt removers size 24mm?? |
|
|
|
Post by Muddytazz on Mar 25, 2006 11:52:11 GMT -5
vise grips or a pipe wrench should work
|
|
|
|
Post by Dicenn on Mar 25, 2006 19:27:24 GMT -5
tried the pipe wrench but you can't get it on the bolt extept to tieghten it... I tried a hammer and chissel... no luck... i need to get this bolt off so I can chance the oil in the t-case... any one have any more ideas?? I will come to you if need be...
|
|
|
|
Post by poorboy1 on Mar 25, 2006 20:32:03 GMT -5
weld a bolt to it.
|
|
Outlawford
trail master
GOT TUBE DOORS?
Posts: 552
|
Post by Outlawford on Mar 25, 2006 22:00:35 GMT -5
I got this vise grip from napa that the guy told me it was made for round off heads.If you want to try them let me know i can send you a pic of it to see if it will help you at all.
|
|
|
|
Post by ReBeL on Mar 25, 2006 22:23:56 GMT -5
I took over the pipe wrench today just not enough room to get on it good. I got a set of sockets that are made for striped bolts but they only go up to 19mm and his is 24mm. i think try beating on a smaller 12point socket nothing to losse and like Jason the only thing after that is to weld a socket to it.  |
|
|
|
Post by Dicenn on Mar 26, 2006 0:59:07 GMT -5
I got this vise grip from napa that the guy told me it was made for round off heads.If you want to try them let me know i can send you a pic of it to see if it will help you at all. sent me the pic... If all else fails I will need to have some one weld a bolt for me... I really need to get it change before sand lake... |
|
Outlawford
trail master
GOT TUBE DOORS?
Posts: 552
|
Post by Outlawford on Mar 26, 2006 1:50:22 GMT -5
I sent the pics to your yahoo email.They have saved me few times.
|
|
|
|
Post by Dicenn on Mar 28, 2006 17:14:24 GMT -5
outlawford, are you going to the BBQ?? I would like to give the vise grips a try... If you are going I can go it out there on saturday or if you are not going to make it what are you doing Friday?? I am off work and open to drive to you...
|
|
TODD
axle snapper
shelbydog
Posts: 176
|
Post by TODD on Mar 28, 2006 17:40:59 GMT -5
I CAN ASK ABOUT USING THE WELDER. SO CALL ME IF YOU CANT GET IT.
|
|
Outlawford
trail master
GOT TUBE DOORS?
Posts: 552
|
Post by Outlawford on Mar 28, 2006 22:55:02 GMT -5
No i cant make the bbq.I got to work on Friday i will be back to my shop by noon.so if you want to pick them up there thats fine.I work in wilsonville.Let me know it real easy to find.I will email you the info so you can map quest it if you want to do that.I will be out of town thursday be back friday.
|
|
