IF YOU HAD 25,000 dollars

TODD axle snapper shelbydog Posts: 176	IF YOU HAD 25,000 dollars May 10, 2006 18:02:31 GMT -5 Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by TODD on May 10, 2006 18:02:31 GMT -5 what kind stuff would you buy for your 4x4 shop! give me some idea's
	I set up gears as a part-time job soon to be full-time and in my own shop! 73 K5 4in. lift 38's 350to 350turbo to a 203 14ff with spool and DA44 open up front.we'll you stop touching me!!!!!!!!!! (wait tell people are lookin) I like it that way.

poorboy1 Administrator Amity, Or Posts: 14,164	IF YOU HAD 25,000 dollars May 10, 2006 19:10:11 GMT -5 Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by poorboy1 on May 10, 2006 19:10:11 GMT -5 a lift, tubing bender, good welder, large air compressor, plasma cutter, drill press, workman/punch/shear.
	My drinking club has a mud bogging problem.

leadfoot Poor Bastard BROKE BASTARD Posts: 1,099	IF YOU HAD 25,000 dollars May 10, 2006 22:46:40 GMT -5 Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by leadfoot on May 10, 2006 22:46:40 GMT -5 I know where you can get a TTC blazer for $25,000.
	WWW.BROKEBASTARDSOFFROAD.COM

poorboy1 Administrator Amity, Or Posts: 14,164	IF YOU HAD 25,000 dollars May 10, 2006 23:13:06 GMT -5 Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by poorboy1 on May 10, 2006 23:13:06 GMT -5 Blazer aint gonna help tool up a shop. besides you should ebay it.
	My drinking club has a mud bogging problem.

cards4me mud bogger Active Member Thanks again for the truck Travis. Travis Ash 5/18/79-6/28/08. Posts: 990	IF YOU HAD 25,000 dollars May 10, 2006 23:33:31 GMT -5 Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by cards4me on May 10, 2006 23:33:31 GMT -5 I'd want a pit, insulation and a heater. Hey what can I say I like to stay warm.

TODD axle snapper shelbydog Posts: 176	IF YOU HAD 25,000 dollars May 11, 2006 2:36:24 GMT -5 Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by TODD on May 11, 2006 2:36:24 GMT -5 admin said: a lift, tubing bender, good welder, large air compressor, plasma cutter, drill press, workman/punch/shear. what is a workman/punch/shear.
	I set up gears as a part-time job soon to be full-time and in my own shop! 73 K5 4in. lift 38's 350to 350turbo to a 203 14ff with spool and DA44 open up front.we'll you stop touching me!!!!!!!!!! (wait tell people are lookin) I like it that way.

poorboy1 Administrator Amity, Or Posts: 14,164	IF YOU HAD 25,000 dollars May 11, 2006 8:33:46 GMT -5 Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by poorboy1 on May 11, 2006 8:33:46 GMT -5 it is a hydrolic shear and punch, usually you can get attachments to bend thick flat steel.
	My drinking club has a mud bogging problem.

leadfoot Poor Bastard BROKE BASTARD Posts: 1,099	IF YOU HAD 25,000 dollars May 11, 2006 21:33:16 GMT -5 Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by leadfoot on May 11, 2006 21:33:16 GMT -5 admin said: Blazer aint gonna help tool up a shop. besides you should ebay it. Thought about it, still might.
	WWW.BROKEBASTARDSOFFROAD.COM

TODD axle snapper shelbydog Posts: 176	IF YOU HAD 25,000 dollars May 13, 2006 15:14:05 GMT -5 Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by TODD on May 13, 2006 15:14:05 GMT -5 admin said: it is a hydrolic shear and punch, usually you can get attachments to bend thick flat steel. do you know where to get one?
	I set up gears as a part-time job soon to be full-time and in my own shop! 73 K5 4in. lift 38's 350to 350turbo to a 203 14ff with spool and DA44 open up front.we'll you stop touching me!!!!!!!!!! (wait tell people are lookin) I like it that way.

TODD axle snapper shelbydog Posts: 176	IF YOU HAD 25,000 dollars May 13, 2006 15:20:36 GMT -5 Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by TODD on May 13, 2006 15:20:36 GMT -5 i found a bender for 2995.99 w/ 3 die's what do you think about a sq. die's for makeing custom brushguard
	I set up gears as a part-time job soon to be full-time and in my own shop! 73 K5 4in. lift 38's 350to 350turbo to a 203 14ff with spool and DA44 open up front.we'll you stop touching me!!!!!!!!!! (wait tell people are lookin) I like it that way.

imbentagain
lil wheeler

Posts: 22

IF YOU HAD 25,000 dollars May 13, 2006 21:46:55 GMT -5

Quote

Post by imbentagain on May 13, 2006 21:46:55 GMT -5

todd said:

admin said:

it is a hydrolic shear and punch, usually you can get attachments to bend thick flat steel.

do you know where to get one?

Google "Ironworker" www.oceanmachinery.com/peddinghaus-ironworkers-iron-worker.htm
theres a start. That was the first thing I was going to suggest.
Welder,
Ironworker,
Plasma cutter,
Pipe Bender,
Press,
Large volume air compressor stored in an outbuilding,
A good "thinking chair"
Beer fridge

imbentagain lil wheeler Posts: 22	IF YOU HAD 25,000 dollars May 13, 2006 21:49:53 GMT -5 Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by imbentagain on May 13, 2006 21:49:53 GMT -5 Heres a simple one www.medfordtools.com/metalproironworkers.html

TODD
axle snapper

shelbydog

Posts: 176

IF YOU HAD 25,000 dollars May 14, 2006 18:30:30 GMT -5

Quote

Post by TODD on May 14, 2006 18:30:30 GMT -5

thanks poorboy's. i know I'm going to have to get my own shop going.so I don't have anybody telling me to cut corners!OR WHAT TO DO only the customer to answer to. I have been looking for the shop stuff.I dont want to leave anything out.
I have that web-site on my favorites along w/a bunch more sites.
so keep the INFO comming. I can use every bit of it!

I set up gears as a part-time job soon to be full-time and in my own shop! 73 K5 4in. lift 38's 350to 350turbo to a 203 14ff with spool and DA44 open up front.we'll you stop touching me!!!!!!!!!! (wait tell people are lookin) I like it that way.

yamxer438 supporting member Posts: 673	IF YOU HAD 25,000 dollars May 19, 2006 14:37:37 GMT -5 Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by yamxer438 on May 19, 2006 14:37:37 GMT -5 what about a manual lathe and mill gonna need a chop saw for cutting all that tubing

TODD axle snapper shelbydog Posts: 176	IF YOU HAD 25,000 dollars May 23, 2006 0:09:34 GMT -5 Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by TODD on May 23, 2006 0:09:34 GMT -5 yes a chop saw or a cold saw those things are cooll.
	I set up gears as a part-time job soon to be full-time and in my own shop! 73 K5 4in. lift 38's 350to 350turbo to a 203 14ff with spool and DA44 open up front.we'll you stop touching me!!!!!!!!!! (wait tell people are lookin) I like it that way.

Post by TODD on May 10, 2006 18:02:31 GMT -5

Post by poorboy1 on May 10, 2006 19:10:11 GMT -5

Post by leadfoot on May 10, 2006 22:46:40 GMT -5

Post by poorboy1 on May 10, 2006 23:13:06 GMT -5

Post by cards4me on May 10, 2006 23:33:31 GMT -5

Post by TODD on May 11, 2006 2:36:24 GMT -5

Post by poorboy1 on May 11, 2006 8:33:46 GMT -5

Post by leadfoot on May 11, 2006 21:33:16 GMT -5

Post by TODD on May 13, 2006 15:14:05 GMT -5

Post by TODD on May 13, 2006 15:20:36 GMT -5

Post by imbentagain on May 13, 2006 21:46:55 GMT -5

Post by imbentagain on May 13, 2006 21:49:53 GMT -5

Post by TODD on May 14, 2006 18:30:30 GMT -5

Post by yamxer438 on May 19, 2006 14:37:37 GMT -5

Post by TODD on May 23, 2006 0:09:34 GMT -5

Quick Reply