|
|
Post by fordman1978 on Jan 18, 2009 2:28:27 GMT -5
where is up there at??.........cool looking jeeps that would be the top of pumpkin ridge. been wheeling there since i was born |
|
|
|
Post by fordman1978 on Jan 18, 2009 2:30:09 GMT -5
Looks like the seat is still dry  i wish. the seat sucked up alot of water. i still have 2 inches of water on the floor. |
|
|
|
Post by fordman1978 on Feb 20, 2009 0:51:38 GMT -5
ive been getting a little bit done lately. im getting close to the axle and motor swaps. i found a nice chevy 383 stroker, chevy d60 front and 14bt rear that are both locked. i just need to look for a trans and transfer case. when done it will be sitting on my 44 boggers 4 linked with fox nitrogen shocks
|
|
|
|
Post by fordman1978 on Mar 9, 2009 19:50:38 GMT -5
|
|
|
|
Post by fordman1978 on Mar 11, 2009 22:43:28 GMT -5
i picked up my axles today chevy 60 and 14bt rear so i can start working on those now (gears, lockers, chromo and 14bt disc brakes)
|
|
|
|
Post by WILLYNILLY on Mar 12, 2009 9:04:31 GMT -5
are those tires going on that jeep? You should shave the fenders and keep that height! Would look awesome!!!
|
|
|
|
Post by fordman1978 on Mar 12, 2009 15:58:01 GMT -5
yea the 44"s are going on the tj. it will only be a few inches higher than it is now and a little longer
|
|
|
|
Post by WILLYNILLY on Mar 12, 2009 16:14:05 GMT -5
few inches higher cause of the tires or are you going to lift it too..
|
|
|
|
Post by fordman1978 on Mar 12, 2009 22:08:17 GMT -5
a little bit of both since it is only on a 4" lift with the 38"s already so it will end up with 5-6" of lift to clear everything a little better
|
|
|
|
Post by fordman1978 on Mar 14, 2009 4:48:05 GMT -5
i got my coilovers and comp cut corners ordered today along with pulling my front fenders off and started on putting the tube fenders together  |
|
|
|
Post by WILLYNILLY on Mar 14, 2009 8:17:43 GMT -5
are you doing some diy fenders or are those your handy work? are you going to be swaping your fuel tank out?
|
|
|
|
Post by fordman1978 on Mar 14, 2009 16:48:10 GMT -5
these are the bluetorch fab diy fenders. yea i will be swapping my tank out when i comp cut. i still havent decided between efi and a fuel cell or just running propane.
|
|
|
|
Post by fordman1978 on Mar 16, 2009 0:11:04 GMT -5
got a little more done. trailered the jeep to my buddies and got the tube fenders on and welded up. just a little grinding and paint and their done.   |
|
|
|
Post by poorboy1 on Mar 16, 2009 0:25:46 GMT -5
i cant stand fabbing on a dirty rig, looks like ya went muddin right before working on it. looking good though.
|
|
|
|
Post by fordman1978 on Mar 16, 2009 1:48:28 GMT -5
it was a last minute thing so i didnt get a chance to clean it.
|
|
