|
GMC
Oct 9, 2008 11:31:44 GMT -5
Post by Buzzer on Oct 9, 2008 11:31:44 GMT -5
leafs was told at one time to us the rear leafs on it now for the front and jeep leafs in the rear... still need to look into it more
|
|
|
GMC
Oct 9, 2008 11:44:45 GMT -5
Post by WILLYNILLY on Oct 9, 2008 11:44:45 GMT -5
should be cool, dont see many full width jimmys out ther!
|
|
|
GMC
Oct 9, 2008 13:56:43 GMT -5
Post by Leeland on Oct 9, 2008 13:56:43 GMT -5
I might have a full size short bed frame availible next time I come home, mount your body on that then full size axles are pretty much a bolt in and it'll be v-8 ready.
|
|
|
GMC
Oct 9, 2008 14:10:48 GMT -5
Post by Leeland on Oct 9, 2008 14:10:48 GMT -5
Forgot to mention I have the title and it would be free just want the major stuff off and back so I can start again on another truck.
|
|
|
GMC
Oct 9, 2008 14:34:11 GMT -5
Post by Buzzer on Oct 9, 2008 14:34:11 GMT -5
I might have a full size short bed frame availible next time I come home, mount your body on that then full size axles are pretty much a bolt in and it'll be v-8 ready. thanks, but for this build it'll be stock jimmy minus the full size axles I'll be helping Chevtec to that very thing... body swap on to a full size frame
|
|
|
GMC
Oct 9, 2008 16:44:55 GMT -5
Post by Buzzer on Oct 9, 2008 16:44:55 GMT -5
Thanks Randy.... Looks like after i get the brackets,,, a place there in Vancouver I can get the rotors/calipers pretty cheap (and there new)
|
|
|
GMC
Oct 14, 2008 1:59:41 GMT -5
Post by The Black Jeep on Oct 14, 2008 1:59:41 GMT -5
Got a pic for ya
|
|
|
GMC
Oct 16, 2008 15:07:00 GMT -5
Post by Buzzer on Oct 16, 2008 15:07:00 GMT -5
Thanks Ken.... worked on the axles for an hour or so today.... the rear is torn down, painted and ready for the disk conversion Can it be welded up with out pulling it all out? (rear D60) still got to tear down the front, and do u-joints/disk /paint was going to do the camo flat green, but the black was cheaper.. Anyone need rear D60 drum parts? before i give them to my scraper....
|
|
|
GMC
Oct 16, 2008 15:18:59 GMT -5
Post by ReBeL on Oct 16, 2008 15:18:59 GMT -5
from all i have seen and herd you are best to pull to weld up better welding that way pluse shoot you are right there. hay you need to get rid of the scrap bring them over going to scrap yard tommrow (fri)
|
|
|
GMC
Oct 16, 2008 16:43:29 GMT -5
Post by Rock Dawg on Oct 16, 2008 16:43:29 GMT -5
That Dana 60 is looking pretty sexy, now you just need it under the back to get it dirty :-)..
Is it 16 spline?
|
|
|
GMC
Oct 16, 2008 17:26:46 GMT -5
Post by Buzzer on Oct 16, 2008 17:26:46 GMT -5
Sure is... here ya go Josh
|
|
|
GMC
Oct 16, 2008 17:35:16 GMT -5
Post by Rock Dawg on Oct 16, 2008 17:35:16 GMT -5
I have a complete spare axle with a new powerlocker in it and 4.10 gears that I have offered to my cousin (Free). He has not picked it up yet. I will ask him again if he wants it, if not.... I will give you a call and have you come pick it up :-)...
|
|
|
GMC
Oct 16, 2008 17:37:25 GMT -5
Post by Buzzer on Oct 16, 2008 17:37:25 GMT -5
I have a complete spare axle with a new powerlocker in it and 4.10 gears that I have offered to my cousin (Free). He has not picked it up yet. I will ask him again if he wants it, if not.... I will give you a call and have you come pick it up :-)... you ROCK
|
|
|
GMC
Oct 16, 2008 20:08:36 GMT -5
Post by WILLYNILLY on Oct 16, 2008 20:08:36 GMT -5
amazing what a little black paint will do to a rusty old axle!!! when are you going to start putin them in the rig?
|
|
|
GMC
Oct 16, 2008 20:12:30 GMT -5
Post by Buzzer on Oct 16, 2008 20:12:30 GMT -5
it's going to be awhile.... just getting them ready... we still need to do Chevtec's body swap/build
|
|