|
GMC
Sept 6, 2012 22:36:59 GMT -5
Post by Jonny tsunami on Sept 6, 2012 22:36:59 GMT -5
replacing the king pin them self's is fun I would suggest help on that I did.
|
|
|
GMC
Sept 6, 2012 22:40:43 GMT -5
Post by poorboy1 on Sept 6, 2012 22:40:43 GMT -5
i got a allen wrench that fits the king pin or just take an extra long lug nut and put in it then use a socket
|
|
|
GMC
Sept 6, 2012 22:52:20 GMT -5
Post by Buzzer on Sept 6, 2012 22:52:20 GMT -5
Thanks... not sure if Josh still has his.... we did his and used a large pipe as a breaker bar
|
|
|
GMC
Sept 6, 2012 23:25:13 GMT -5
Post by chevtech on Sept 6, 2012 23:25:13 GMT -5
I can get that allen wrench again from work when we are ready to do them.
|
|
|
GMC
Sept 6, 2012 23:30:56 GMT -5
Post by Buzzer on Sept 6, 2012 23:30:56 GMT -5
rock rings being cut, U-bolts and plates/lower shock mount in shipment..
The D44 has been stripped
Waggy springs, Inner axle shafts, Ruffstuff diff cover and Lock-right up for grabs (4:10 and down carrier). PM if interested.....
|
|
|
GMC
Sept 12, 2012 16:24:32 GMT -5
Post by Buzzer on Sept 12, 2012 16:24:32 GMT -5
|
|
|
GMC
Sept 26, 2012 13:18:59 GMT -5
Post by Buzzer on Sept 26, 2012 13:18:59 GMT -5
got my lockouts from Pirate today Pick up the racing seats tomorrow (Like Chevtech's)
|
|
|
GMC
Sept 26, 2012 19:52:24 GMT -5
Post by mudmaniac3 on Sept 26, 2012 19:52:24 GMT -5
woo lets get this thing going winter is a coming
|
|
|
GMC
Sept 27, 2012 0:25:58 GMT -5
Post by Buzzer on Sept 27, 2012 0:25:58 GMT -5
woo lets get this thing going winter is a coming Chevtech and I have 4 sets for 5:38's to install 1st...lol
|
|
|
GMC
Sept 27, 2012 9:40:52 GMT -5
Post by mudmaniac3 on Sept 27, 2012 9:40:52 GMT -5
ha thats alot. at least you will be well practiced when ur done
|
|
|
GMC
Oct 20, 2012 18:06:50 GMT -5
Post by Buzzer on Oct 20, 2012 18:06:50 GMT -5
|
|
|
GMC
Oct 25, 2012 19:00:24 GMT -5
Post by mudslinger97117 on Oct 25, 2012 19:00:24 GMT -5
did u end up welding them all around?
|
|
|
GMC
Oct 25, 2012 19:11:40 GMT -5
Post by Buzzer on Oct 25, 2012 19:11:40 GMT -5
did u end up welding them all around? Nope, just used some rubber cement.... .lol Yeah there fully welded.
|
|
|
GMC
Oct 29, 2012 2:31:33 GMT -5
Post by Buzzer on Oct 29, 2012 2:31:33 GMT -5
one mounted up.. still need to run down the 8 nuts and air up.... Got some brass valve stems and had them bent to 60 deg... worked awesome...
|
|
|
GMC
Oct 29, 2012 13:40:13 GMT -5
Post by Jonny tsunami on Oct 29, 2012 13:40:13 GMT -5
dont forget to lube your o-ring
|
|