|
Post by 96zjlarado on Aug 16, 2008 20:59:08 GMT -5
well, i finally decided to get off my arse and refinish the carbon fiber wing on the Evo. the factory clear was starting to flake off. pretty common issue on the Evo VIII's. What a pain in the A$$!!! can't go too far because you start getting into the carbon, but you have to go far enough to get all, and i mean ALL of the clear off. Anyway, on to the pics. after a LOT of wet sanding, this is the first coat of clear. I sprayed 4 more coats on it and then had a little boo boo. didn't clear the tip between coats and a drop of clear formed on the tip and got sparyed onto the wing causing a big run. once it cures i can scrape it with a razor blade to level it, wet sand it and put a few more coats on it. hopefully without any F-ups this time.
|
|
|
Post by poorboy1 on Aug 16, 2008 21:16:38 GMT -5
looks much better
|
|