|
Post by norseman74d on May 7, 2007 15:13:40 GMT -5
i was thinking of doing that for the break lines for now but i was kinda worried about twisting the metal line... but if it works it works right....the pitmans are 60- 130 for what i've seen ans as for shocks something comprable to rancho rs5000's should do.. i think i'll drop the line under the rail and worry about the rest later an go have some funn!!!!!
|
|
|
Post by norseman74d on May 10, 2007 1:10:55 GMT -5
:-/well i got the lines outta the frame i'm gonna wire em up tomorow and snap a frw piks and post em oh and if i get some more brake fluid i'll snap a few poser piks from the hill in front of the house again the reason it took so long cause it took me and my buddy 4 days to get his fabtec 5.5" lift right on his prerunner ranger
|
|
|
Post by norseman74d on May 10, 2007 15:35:34 GMT -5
so here's the gehetto dropped brake lines all i need to do is wire em up and bleed the brakes!!!
|
|
|
Post by WILLYNILLY on May 10, 2007 19:30:18 GMT -5
Are your brake lines gonna clip to anything? Cant wait to see it all done!!!
|
|
|
Post by norseman74d on May 10, 2007 19:38:29 GMT -5
there's a few holes that i'll wire it too, other than that no. the wire should hold good till i break down and buy longer lines!
|
|
|
Post by norseman74d on Aug 21, 2007 23:16:56 GMT -5
so as some of you know i blew the motor in the burbon!!!!! i got a replacement one for $150 all it needs is to be reasymbled and thrown in..... after i pull the other one and as a bonus the motor came with an engine stand too!!! it came out of a chevelle and from what i can tell is in really good condition!! i'll post piks of it asap it also came with mickey thompson valve covers and the M/T on it is a matching chevy orange!!!
|
|
|
Post by norseman74d on Aug 22, 2007 2:30:50 GMT -5
|
|
|
Post by jeeplessjohn on Aug 22, 2007 7:19:13 GMT -5
hell yeah get that thing in there
|
|
|
Post by poorboy1 on Aug 22, 2007 8:39:17 GMT -5
already see your first broken bolt Any specs on the motor or is it a dressed up stocker?
|
|
|
Post by MudHog on Aug 22, 2007 8:40:41 GMT -5
whens it goin in,,,thats gonna be slick,,,do ya know the H.P.?
|
|
|
Post by norseman74d on Aug 22, 2007 13:18:40 GMT -5
my guess it's a dressed up stocker!! so i'm guessing 300 or less hp i think i'll dyno it later for poops and giggles after it's in! the bolt shouldn't be a problem to extract if so i'll just tap the bitch!!! LOL!!! i figure it will get the burbon on the road untill i can buy a beefier engine. i'm almost tempted to rebuild the goodwrench engine and beef it up but i'm not sure yet. if anything i'll rebuild it and make it a tourque monster!!!
|
|
|
Post by norseman74d on Sept 25, 2007 23:32:40 GMT -5
so i got the hook up fron n5836 i now have a edelbrock 600 cfm carb to go with the intake so i now can run the performer intake instead of the stock carb and intake! i'll post piks when it's all bolted up...... hopefully some time this week!! i'm thinking, if everything goes right, i'll have the old motor pulled and accesories swapped and the new motor installed by next week and having her ready for a trip to browns the following week!!! that's IF everything goes right! but first things first i gotta find the damn keys!!!!!! LOL, i misplaced them and can't rember where i put them!!!!!!! DAMN PTSD!!!!!!!lol!!!!!!
|
|
|
Post by norseman74d on Jun 28, 2010 17:02:39 GMT -5
so sadly the burbon had go the other day! so it is time to eventually look fer a new rig! but for now it is just 2 wheel drive fer now!so if poorboy could, could you delete this whole posting for me.... thanks!
|
|