andrew
net wheeler
my give a damn is broken
Posts: 2
|
Post by andrew on Apr 11, 2005 14:11:50 GMT -5
as you all probly know, the IFS lifts for the blazer are too expensive, and me also being cheap, would doing a 3inch body lift with 32" kuhmas(sp.) people say to take and crank the tortion bars, but i heard that a couple months after you do that you take and wear out after a while. so if you think that what i have planned is a good idea, or you have any other ideas, post em' here.
|
|
|
|
Post by poorboy1 on Apr 11, 2005 17:58:50 GMT -5
if you need the extra lift out of the torsion bars and are gonna run the street be sure to get the alignment checked. Or just trim the fenders.
|
|
jay
axle snapper
Posts: 194
|
Post by jay on Apr 17, 2005 9:46:38 GMT -5
i wouldnt crank them too much. it puts a wierd angle on the lower ball joints. if its got miles on it, and you go beating the hell out of it, they may not hold up. ive been there before.
|
|
