|
Post by possumpieces on Jul 1, 2011 22:16:14 GMT -5
looks good
|
|
|
Post by stefanh on Jul 1, 2011 22:42:58 GMT -5
Thanks. Only cost me 80$ total get them done and welded on
|
|
|
Post by possumpieces on Jul 2, 2011 9:53:06 GMT -5
wOW Thats cheep. Are they tube or pipe?
|
|
|
Post by stefanh on Jul 2, 2011 23:07:10 GMT -5
They're tubing if I remember right. It's the next step up from .120 wall tubing
|
|
|
Post by stefanh on Jun 11, 2012 0:59:25 GMT -5
Alright time to update about the ole yota.
Got my 350 swap goin good so far had to swap out the 242 T case for a 208 but it worked out good
Got the th400 mounted up good everything is welded up
Just waiting on my E fuel pump, E fan, B&M mega shifter, headers an exhaust, and the wiring then she ready to rock
|
|
|
Post by stefanh on Jun 11, 2012 1:32:40 GMT -5
Not a 242 it was a 241
|
|
|
Post by stefanh on Nov 15, 2012 22:48:41 GMT -5
So here's an update on the ole yoter Did my 350 swap just an intake, carb an points distributor. Next week putting a narrowed 12 bolt in the rear and a narrowed 10 bolt in the front Then sometime in the near future partial exo cage
|
|
|
Post by stefanh on Nov 15, 2012 22:49:41 GMT -5
An also a 465/465 summit cam
|
|
|
Post by stefanh on Dec 30, 2012 21:31:20 GMT -5
Well here's the front narrowed 10 bolt still working on the axles gonna put in some jimmy rigged setup for now Narrowed 4 1/2" on the long side and 2 1/4" short side. Sits 2" wider than a ifs Toyota rear axle. Have Dana 44 knuckles with sky's High steer arm with good ole custom steering linkag and such
|
|
|
Post by stefanh on May 4, 2013 16:16:06 GMT -5
Well here's an update 207 bolt 4 bolt main bored and hot tanked with an eagle crank
|
|
|
Post by stefanh on May 4, 2013 16:17:25 GMT -5
.030 pistons with kmj performance h beam rods
|
|
|
Post by stefanh on Jun 18, 2013 0:06:07 GMT -5
Got the 383 stroker motor in it and holy hell it's awesome
|
|
|
Post by stefanh on Jun 18, 2013 0:06:59 GMT -5
Post pictures as soon as I can get to photo buket
|
|
|
Post by stefanh on Jun 22, 2013 10:11:10 GMT -5
|
|
|
Post by stefanh on Sept 29, 2013 21:53:00 GMT -5
So I kept hearing a clunking sound stalled the motor up and that's what I found. Those are 3 months old. The first one the ears and actual mount broke and the second mount was starting to crack through. And we had to pry it out from it being so twisted
|
|