|
Post by windturbine1 on Jun 26, 2010 21:26:25 GMT -5
|
|
|
Post by windturbine1 on Jun 27, 2010 14:49:42 GMT -5
im thinking about doing herculiner on the outside as well as the inside. has anyone used herculiner that can give me some tips?
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jun 28, 2010 14:41:01 GMT -5
It hurts when it rips your skin off. Dont brush against it!
|
|
|
Post by windturbine1 on Jul 2, 2010 16:19:10 GMT -5
the top is off now. full tune up was just done this morning. herculiner tomorrow. pics to follow.
|
|
|
Post by windturbine1 on Jul 8, 2010 22:33:54 GMT -5
a little update. i just picked up a set of 35-15.50-15 swampers. ill run those until i get more lift and i get my new 42in swampers. should have them on by end of the weekend. and the inside should be coated as well.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jul 13, 2010 12:36:11 GMT -5
42's will snap your axles like a twig unless you only drive it on the pavement. Those 35x15.5's are going to stress them pretty good too.
|
|
|
Post by windturbine1 on Aug 14, 2010 19:13:23 GMT -5
|
|
|
Post by Buzzer on Aug 14, 2010 19:22:05 GMT -5
Besides being a Dodge ... It's looking great! before that thing gets to high up... get those Mud flaps on.
|
|
|
Post by possumpieces on Aug 16, 2010 8:24:24 GMT -5
That bed liner made a big diference. Looks great.
|
|
|
Post by backwardboggers on Aug 16, 2010 16:43:21 GMT -5
No shit. Looks good.
|
|
|
Post by windturbine1 on Aug 18, 2010 20:23:54 GMT -5
thanks guys. eventually i will have the whole interior done with it. damn freakin electrical issues. i went to check if my cigarette lighter worked and found out my brake lights didnt work. traced it back to the steering wheel adapter grounding out the circuit for the flashers. i spaced the wheel out about a 1/16 and replaced the flasher and i now have brake lights. and the thing is im leaving for the beach in the morning so this was a fix it right now or leave it home problem. and im not going to the beach with out it. ill post up pics when we get back.
|
|
|
Post by windturbine1 on Aug 29, 2010 1:33:52 GMT -5
well i hit a minor snag on our way to the beach last weekend. we stopped at the store for last minute things and the truck wouldnt start. after messin with it for about an hour i conceded and had it towed home. when i got home i started to check things. i found that the starter relay was the culprit. i put in a new one and checked everything else and didnt find anything else. so hopefully i resolved the issue. now on to the tranny leak.
|
|
|
Post by windturbine1 on Sept 20, 2010 23:25:22 GMT -5
well i put the top back on a few weeks ago. i jumped in it the other day and found a pool of water inside. so ive been busy with silicone sealer and foam tape to stop the leaks. i so need a soft top.
|
|
|
Post by windturbine1 on Oct 7, 2010 0:07:18 GMT -5
a little update. i believe the leaks are fixed. i have the front floors done now. i did a little spring work today to get ready for saturday. removed the bolt. albums/ab302/windturbine1/011.jpg[/IMG]removed the tabs. i also took the sway bar off. oh yeah i forgot. i got a new sticker today.
|
|
|
Post by windturbine1 on Oct 7, 2010 0:08:56 GMT -5
and the front floor.
|
|