|
Post by mvande33 on May 1, 2009 23:46:46 GMT -5
got some work done today front axle is pretty much all mocked up had to do some major bracket work today, but i think i worked it all out i didnt get any photos of the trouble shooting but here is the finished product let me know what you think.
|
|
|
Post by fordman1978 on May 2, 2009 2:04:48 GMT -5
its looking good. almost ready to wheel. i was going to try to get out there today but my cousins girlfriend had her baby today so i had to show up with the cigars and everything. give me a call if your working on it this weekend.
|
|
|
Post by mvande33 on May 2, 2009 21:58:17 GMT -5
got a little bit done today got the viynl picked out to make the soft top and clear window material, and then i picked up 3/4ton chevy calipers and new wheel bearings and races so i can fit the ford rotors over the chevy spindles, just need to press them in and put the hub together and it will be ready for wheels and tires.
|
|
|
Post by mvande33 on May 10, 2009 0:31:35 GMT -5
did a little more work today decided to go a little differnt route on the rear.i went ahead and skinned in the lower and will have the soft top come straight down and button to it on the cross member so it will stay a little warmer inside in the rear and it can still be open in the summer.
|
|
|
Post by Brennerbadboy on May 10, 2009 17:31:09 GMT -5
it looks like its comming together, looks nice
|
|
|
Post by mvande33 on May 12, 2009 23:18:21 GMT -5
back all finished waiting for my soft top to be finished
|
|
|
Post by The Black Jeep on May 13, 2009 7:22:39 GMT -5
Sweet , lookin good
|
|
|
Post by WILLYNILLY on May 13, 2009 7:48:20 GMT -5
turned out nice!! bed liner was a good call!
|
|
|
Post by mvande33 on May 13, 2009 9:55:11 GMT -5
yeah i think it turned out pretty good myself atleast it will keep the water from running from the rear into the cab if nothing else.
|
|
|
Post by Brennerbadboy on May 13, 2009 10:36:27 GMT -5
get your tail gate on ,seal it up and put in a hot tub.......................LOOKING GOOD
|
|
|
Post by mvande33 on May 13, 2009 23:10:02 GMT -5
|
|
|
Post by Buzzer on May 13, 2009 23:16:41 GMT -5
can't you still use the factory tierod locations?
|
|
|
Post by mvande33 on May 13, 2009 23:29:02 GMT -5
yeah i can but i was hoping to get it up and out of the way but if it comes down to that i can run just cross over steering i wont be completely disappointed.
|
|
|
Post by WILLYNILLY on May 14, 2009 11:00:42 GMT -5
looks like your spring brackets stick out too far I dont know if you have the clearance to turn with the tie rod in the inside hole...
|
|
|
Post by mvande33 on May 14, 2009 12:05:37 GMT -5
i dont thats why i was thinking about running it on the outside but then i dont know what to do with the draglink i think binding maybe a big problem with running it on the inside.
|
|