|
Post by Rock Dawg on Dec 4, 2008 13:55:58 GMT -5
Well with this issue, I might need to buy you this for Christmas:-).. I hope you get a straight one with a title soon buddy! sorry for the post, I saw it and was thinking of you
|
|
|
Post by chevtech on Dec 4, 2008 23:46:21 GMT -5
|
|
|
Post by poorboy1 on Dec 4, 2008 23:51:59 GMT -5
you gotta have a yard full of s10 by now....
|
|
|
Post by chevtech on Dec 4, 2008 23:54:17 GMT -5
Just a shop full!
|
|
|
Post by junkyard dog on Dec 4, 2008 23:55:58 GMT -5
right on
|
|
|
Post by Buzzer on Dec 5, 2008 0:08:00 GMT -5
No problem.... Just glad he hadn't gotten rid of it yet.....
|
|
|
Post by WILLYNILLY on Dec 5, 2008 1:45:48 GMT -5
looks like you have a blank slate to start with? what do ya have planned?
|
|
|
Post by chevtech on Dec 5, 2008 2:17:31 GMT -5
-Straight axle w/dana 60 front diff, lockright locker, 35 spline stub shafts, 4.10's -14 bolt rear diff, welded spiders, disc brakes, 4.10's -Tbi 350 engine, 700r4 trans. -np231/dana 300 doubler or np231/np241 doubler -stretching the wheel base 3" back and 3" forward -39.5" super swamper iroks -ramsey 9500lb winch -some type of roll cage
I know there's more but this will do for now.
Josh
|
|
|
Post by ReBeL on Dec 5, 2008 6:26:06 GMT -5
looks like got some major swaping to do between the 2 rigs so was there much left of the dash
|
|
|
Post by poorboy1 on Dec 5, 2008 7:51:44 GMT -5
Frame looks bent in the last pic.
J/k
|
|
|
Post by WILLYNILLY on Dec 5, 2008 9:26:10 GMT -5
Sounds like its gonna be a beast!!!
|
|
|
Post by possumpieces on Dec 5, 2008 10:49:34 GMT -5
Are you buying a madrooster kit? Or are you building the adapter your self?
|
|
|
Post by chevtech on Dec 5, 2008 11:16:21 GMT -5
If I buy a kit it will be the D.D. Machine kit, I would like to make it myself but I'm trying to figure out how to make the shaft. Here's a link to the kit from D.D. Machine: www.rockhardxj.com/viewtopic.php?t=1686Josh
|
|
|
Post by Brennerbadboy on Dec 5, 2008 12:22:43 GMT -5
with all the frames you have to bad the price of scrap is so low, nice trailer!
|
|
|
Post by chevtech on Dec 5, 2008 12:30:11 GMT -5
If you go to an actual scrap yard and not u-pull it, the price of scrap has gone up to $75 a ton. I took the k5 frame and body in on tuesday, 3000lbs and I got $120.
Josh
|
|