|
Post by Rock Dawg on Apr 30, 2012 16:28:58 GMT -5
no plans for a step yet, I better drive so he doesnt have to get out. Well, Plan for the worst.. We will all be hoping for the best. We know you can drive, but they are making the TTC to stop everyone
|
|
|
Post by Brennerbadboy on Apr 30, 2012 21:23:34 GMT -5
cool vid,s what did the washout look like?? ,wish i could of made it , work got in the way. looking good
|
|
|
Post by poorboy1 on Apr 30, 2012 21:34:17 GMT -5
Washout wasnt bad, didnt play in it much cause there was a jeep broke down in there most of the time
|
|
|
Post by Buzzer on May 26, 2012 22:05:54 GMT -5
|
|
|
Post by Buzzer on May 26, 2012 22:06:48 GMT -5
video
|
|
|
Post by Buzzer on May 27, 2012 21:41:47 GMT -5
|
|
|
Post by stefanh on May 27, 2012 22:18:11 GMT -5
Gotta love the whiteson drinkin fest.... Wait I mean wheelin party haha
|
|
|
Post by blk01ram on May 27, 2012 23:52:48 GMT -5
Truck looks good even covered in mud. How'd it do, anything need to be tweaked before TTC?
|
|
|
Post by poorboy1 on May 27, 2012 23:57:00 GMT -5
no breakage. still needs a sway bar. I wanna say thank you to Bill for helping me get the limiting straps on today and tighten up all the loose jam nuts. He also took all the photos before the camera mis-hap. So far very happy with it, 3 wheeling trips and no failures. (knocks on wood).
|
|
|
Post by Jonny tsunami on May 28, 2012 0:00:04 GMT -5
wow ;D I no your not a huge mud guy but I'm impressed by how mud covered ya got!! After seeing it in action Saturday that thing is so going to whoop some ass at TTCC
|
|
|
Post by poorboy1 on May 28, 2012 0:04:16 GMT -5
I am definetly not a mud guy but when when in Rome.....
|
|
|
Post by Buzzer on May 28, 2012 0:17:24 GMT -5
Anytime..... That thing rocked today! Yeah Broke the new camera..... slipped in a rock pile and went backwards smashing the camera on a rock..... (good thing for no questions warranty!)
|
|
|
Post by poorboy1 on Jul 9, 2012 20:06:00 GMT -5
Just about ready for Browns camp. Repaired the electric fan and headlight wiring today. I had to rip the wires out and hot wire it while in line to do the hill climb at ttc. I removed the windshield until I can fix the A-pillar. For now I just bent the A-pillar away from the cage so it looks half ass normal. Snorkle is all pulled off and K&N has been reinstalled. My new sway bar should be here tomorrow and am hoping to get it installed before this weekend. If I dont its not a big deal but would like to get it on there.
I finally figured out what all new stuff Warn put into my winch. Apperantly the 9.5ti has been replaced with an updated 9.5cti What Warn did for me was put new contact from the cti into my winch along with new guts. So basically I have a 9.5cti but instead of in a black housing it is in the older silver housing.
|
|
|
Post by possumpieces on Jul 9, 2012 22:00:32 GMT -5
What was the deal with the winch line breaking? Weak? or did it snag on something?
|
|
|
Post by poorboy1 on Jul 10, 2012 6:42:00 GMT -5
The line didnt break, it got pulled pretty tight during a short pull half way thru the tank trap and it sucked the cable into the drum and under a couple layers of cable. After that I could not pull the cable out any further than about12-15'. It sucked.
|
|