|
Post by 98nismo on Feb 11, 2008 21:23:32 GMT -5
thanks. the snorkel is sealed, but my ecu is still exposed its on my trans hump under my dash so im hoping its high enough. I mainly did it because I had a open filter on there and I was worried so now i dont have too. its a start..
|
|
|
Post by Jonny tsunami on Feb 11, 2008 21:57:52 GMT -5
I wish I had one....
|
|
|
Post by Buzzer on Feb 11, 2008 22:22:22 GMT -5
i hope that water hole isn't where i think it is.....
|
|
|
Post by WILLYNILLY on Feb 11, 2008 22:49:58 GMT -5
Wheres your snorkle in your water crossing photo? Have you tested the thing out yet, gotta go in at least 6 feet of water to confirm its effectiveness.
|
|
|
Post by 98nismo on Feb 12, 2008 0:43:41 GMT -5
I was on my way to maupin or something to do rafting and found it. where are you thinking? I didnt have it then haha. Its kinda hard finding water crossings around here
|
|
|
Post by 75 on Feb 12, 2008 7:36:40 GMT -5
:osorry it just looks alot like Wagon wheel......during the summer....
So how hard is it to do a snorkel? got a Pic of under the hood?
|
|
|
Post by 98nismo on Feb 12, 2008 19:52:53 GMT -5
huh whats wagon wheel? not too hard the hardest part was drilling into the a pillar thats crazy harden steel. just got to cut one big hole and drill a few others then plumb it. I dont have a pic under the hood I was in a rush getting it done so I could take it to bend so I didnt have time to take pics its just some flex tube coming off of the stock air box then to a aluminum ricer tube haha then through the fender to the snorkel. ill take a quick one though.
|
|
|
Post by 98nismo on Sept 2, 2008 22:49:19 GMT -5
|
|
|
Post by 98nismo on Aug 17, 2009 18:30:44 GMT -5
just an up date on my truck. first I went wheeling yay haha. and snaped a tierod. then I found out ranger seats really dont fit to well with one of the mounts being on the tranny tunnel. and I got a new rear axle to replace my stock one. c200 with 4.6 gears to h233b with 4.9 gears from a 04 Xterra. all i have to do is weld on new perches. if any of you can hel that would be cool cus I cant weld haha. else ill go see if a shop can. well here are the pics. my stock axle will be up for grabs if any of you want it. 50 bux. thats the core charge from the jy
|
|
|
Post by BIG chief on Aug 17, 2009 20:18:18 GMT -5
if you wanna pick up the perches and a 12 pack and bring it down to salem some weekend i can help weld them on for ya
|
|
|
Post by 98nismo on Aug 17, 2009 21:08:43 GMT -5
I could do that. Let me see what I can find around here. I think my neighbor might have a welder. thanks for the offer ill post back when I know
|
|