|
Post by 92sdime on Feb 25, 2012 23:50:40 GMT -5
hey everyone. im coming from s10forum. i love wrenching, im a fulltime student at the community college (diesel tech program) i work at a grocery store i have a 83 chev s10 that i am currently straight axling. hoping to meet some people around my area to go wheeling with.
|
|
|
Post by poorboy1 on Feb 26, 2012 0:21:16 GMT -5
welcome to poorboy.
|
|
|
Post by Buzzer on Feb 26, 2012 0:35:35 GMT -5
Welcome to Poorboy!
nice to see another Dime..... have any pics of it?....
|
|
|
Post by 92sdime on Feb 26, 2012 15:32:21 GMT -5
still gathering parts for it. haha but i plan on using the ORD bolt in kit. specs: 83 2.8 , 5speed 4.30s on 35s removable doors army green paint. i figure if i keep on buying parts i will be forced to start and complete my project. haha! i plan on starting march 23 working as hard as i can for a week (however long spring break is) when i start ill make a build thread somewhere.
|
|
|
Post by Buzzer on Feb 26, 2012 19:54:48 GMT -5
|
|
|
Post by ickyzwicky on Feb 26, 2012 20:34:03 GMT -5
x2 my high pinion dana 60 was too steep of a driveline angle and i had to get an offset u joint for the front. but thats going to be a bad rig, i dig the extended cab s10. I hope u run those wide ass swampers to that will look sick, i got a 233 tranfercase that already has the front output yoke and sye on the rear, im going to run a doubler but i cant sell it til begining of april if you want to wait that long
|
|
|
Post by 92sdime on Feb 26, 2012 23:27:12 GMT -5
i have someone cutting and turning my c's, i plan on running the ord kit SUA with chevy 47s and they are 4inch rancho springs they dude at kaiser brake and alignment said he could regear turn my c's and install the master rebuild for 635 ,it was a fella named kerry .i called up archer bros first and they refereed me to kaiser www.kaiserbrakealignment.com/ heres the link to their site ive been stalking ur build buzzer. on s10forum i love it. u now have a pm btw
|
|
|
Post by Buzzer on Feb 26, 2012 23:30:28 GMT -5
|
|
|
Post by 92sdime on Feb 26, 2012 23:36:32 GMT -5
|
|
|
Post by 92sdime on Feb 26, 2012 23:38:43 GMT -5
x2 my high pinion dana 60 was too steep of a driveline angle and i had to get an offset u joint for the front. but thats going to be a bad rig, i dig the extended cab s10. I hope u run those wide ass swampers to that will look sick, i got a 233 tranfercase that already has the front output yoke and sye on the rear, im going to run a doubler but i cant sell it til begining of april if you want to wait that long is it the one with the lever on the floor? i could deff wait till april. yes i plan on running those tires lol scored em for 200
|
|
|
Post by ickyzwicky on Feb 27, 2012 15:26:49 GMT -5
its the electric push button but i think u can swap the linkage over and run it, i dont know that for sure, u might look into it. if not u can pull all the stuff off it and put it in you tcase
|
|
|
Post by 92sdime on Feb 27, 2012 16:45:43 GMT -5
ill do some homework and ill keep an eye out in the classifieds for it
|
|
|
Post by ickyzwicky on Feb 27, 2012 20:41:27 GMT -5
ayt man well let me know if you decide u want it
|
|
|
Post by 92sdime on Feb 28, 2012 1:48:37 GMT -5
thanks bud! in other news hopefully ordering my kit tomorrow. stupid bank has a hold on my deposit.
|
|
|
Post by 541redbull on Apr 8, 2012 22:48:24 GMT -5
if you need any paint work done just hit me up text call 541 606 6761
|
|