|
Post by Rock Dawg on Aug 18, 2011 16:29:13 GMT -5
Here is a pic of it ..
|
|
|
Post by Jonny tsunami on Aug 18, 2011 23:48:34 GMT -5
yo rusty I mite be able to get my friend to do it at my work, he's the best tig guy I've ever seen and just recently got a job at my shop. I told him about this bike cause he likes to ride too, and he was like thats insane. im sure he'd be more than willing to do it, and its in hillsboro. send me your number I will talk to him tomorrow morning and let you know. text ok?
|
|
|
Post by Rock Dawg on Aug 19, 2011 10:04:14 GMT -5
Thanks buddy, you have a PM. Also here is a video of Tyler racing it up Banshee hill during Dunefest. It is CRAZY FAST.. He never got beat the whole week. He ran against meth stoked banshee's, Turbo'd Raptors, a full built drag bike with wheel bar, and a GSXR1000 Bike with 40HP Nos. Nothing could beat him :-).. In this race, Nic (helmet cam guy) is on his built trx450. It has been ported and polished, Hot cam II, exhaust, intake and swing arm, and rejetted. Nic's bike is fast, but not compared to this bike :-).. www.youtube.com/user/rustyr01?feature=mhum#p/u/22/PxeXpuBvfnQ
|
|
|
Post by popeye on Aug 19, 2011 12:49:21 GMT -5
I never heard back from the guy on the tranny yet when I do I'll let you know
|
|
|
Post by Rock Dawg on Aug 22, 2011 9:37:05 GMT -5
I never heard back from the guy on the tranny yet when I do I'll let you know Thanks, I have the motor in a D&S cycles now. They will also have someone weld up the case. We are expecting to get it back some time this week.
|
|
|
Post by Jonny tsunami on Aug 22, 2011 13:53:22 GMT -5
Thats cool, let me no if you need anything else welded, I talk to my buddy this morning and he said sure, anything you need. sorry I didnt get back to you sooner I was hella sick over the weekend.
|
|
|
Post by popeye on Aug 22, 2011 14:21:09 GMT -5
wish i could have been more help, the welder had knee surgry and the guy that could do the trans was out of town
|
|
|
Post by Rock Dawg on Aug 22, 2011 15:32:30 GMT -5
Thanks guys for your help. I'm just hoping to get it back together soon. We found some welds that need finishing and will be working on improvments to the frame while the motor is out.
|
|
|
Post by cousinmike on Sept 15, 2011 11:47:10 GMT -5
Any updates on the bike?
|
|
|
Post by Rock Dawg on Sept 15, 2011 17:07:41 GMT -5
Just last night I got all the tranny parts. I put the new parts back on the shafts and gave D@S the tranny back with new shift forks and a new shift drum. Mark - one of the owners that took the motor apart had a hart attach so someone else is trying to find a way to put it back together.
Tyler still has to do some welding on some brackets and cut off a motor mount bolt.
We still need a motor mount tab welded back on the motor once we get it back. Then we can go though the fun of putting it back in and reattaching the wires.
|
|
|
Post by poorboy1 on Sept 15, 2011 23:03:33 GMT -5
I can TIG it at work if you still need it done, just let me know.
|
|
|
Post by Rock Dawg on Sept 16, 2011 9:49:16 GMT -5
I can TIG it at work if you still need it done, just let me know. Thanks for the offer but Derrick (Pure insanity truck) is about ½ mile from D@S and he told me to stop by with the motor after we get it back, he should be able to weld it up for $35 and it should just take minutes to do.
|
|
|
Post by Rock Dawg on Oct 4, 2011 15:13:50 GMT -5
Ugh.. I'm STILL waiting to get the motor back from D@S... I gave them the new tranny weeks ago, they just needed to put it back in the case. I'm hoping to get it back some time this week, then get the piece I gave D@S welded back on. It's been long enought it may be a real challange to put it back together again.
|
|
|
Post by Rock Dawg on Oct 24, 2011 13:23:27 GMT -5
We have the motor back in and all hooked up and running again. I would like to take it out and test it some time soon. Maybe this weekend, just to make sure it is all working fine again..
|
|
|
Post by Leeland on Oct 24, 2011 18:38:10 GMT -5
That thing has gotta be one scary ride.
|
|