|
Post by Rock Dawg on May 19, 2010 10:46:50 GMT -5
This is a place for Jason to post up if he needs spare parts to take with him to TTC.
For example:
I believe I have a stock 205 and 203 TC's that are in good working order sitting at my dads house.
I also have parts for a 454, manifolds, new MSD Dist (new in box), good starter.
I have a spare small 3 gauge interment cluster (OIL, water temp, and volt) still new and sealed in the package.
I have a 14 bolt FF (stock), complete with drums, 4.56 and govlock. (almost didn't post, I know you won't need this..)
I have a Detroit locker for the Dana 60. (Used but not needing any repair)
All of the pieces are spare, sitting around collecting dust. I am hoping to build a buggy some day with the parts, but in the mean time they are doing nothing. Jason, if you want to take any with you to have a backup, please contact me.
I’m not suggesting EVERYONE post up all the spare parts they have, I’m sure the list would get to long fast. But maybe if you have a specialty piece (Propane injection, like his, DOM Drive shafts, new compresser+winch, onboard welder, exec) lying around that he may want to barrow. Feel free to post up those types of things.
|
|
|
Post by copenhagen on May 19, 2010 12:16:03 GMT -5
yea, this is a good idea. the 205 thing started getting out of hand lol..
I have some crap layin around, not much. Ill wait to hear whats needed. If i have it, then ill post.
|
|
|
Post by poorboy1 on May 19, 2010 13:22:08 GMT -5
Thanks guys.
Currently I haven
a spare rear shaft 205 parts from pat but will keep people posted if I need more Spare axle shafts front and rear I don't need a complete 203 but just the range box maybe. Have some radiators Have spare ring and pinion
Probably what I need to look for is a front shaft. This will be a lil difficult since mine is a 1450 x 1350 I may have a spare 1350 yoke so I could use a 1350 x 1350 if needed?
I'll post up more when I get home and can think about it.
|
|
|
Post by Ridgerunner on May 19, 2010 13:37:39 GMT -5
Great idea Rusty!!!
|
|
|
Post by copenhagen on May 19, 2010 13:39:30 GMT -5
Oh yea, i got two spare th400's haha.
Ive been posting them on all the 4x forums, and Craigs for 3 months now... with barely any interest.
if you wanted to bring one, just incase.
|
|
|
Post by Jonny tsunami on May 19, 2010 14:03:33 GMT -5
got a th400-203 combo on the floor of the garage.
|
|
|
Post by tomota on May 21, 2010 19:50:31 GMT -5
I have a new chevy alt, hi flow steering pump and a winch that you could take for the trip.
i
|
|
|
Post by poorboy1 on May 26, 2010 13:37:17 GMT -5
Looking for a weight bag for a winch line. I really need to find one.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 26, 2010 17:09:29 GMT -5
50 lb bag of lead shot?
|
|
|
Post by poorboy1 on May 26, 2010 18:30:02 GMT -5
dont think ray could pack that up the canyon.
|
|
|
Post by Ridgerunner on May 26, 2010 21:43:10 GMT -5
Can the weight be metal? I have 2 large nuts with a length of chain welded to them (my version of truck nutz) It would rap around the cable but might not grip it though
|
|
|
Post by copenhagen on May 26, 2010 21:49:27 GMT -5
i was thinking a large tube sock, put a few pounds of sand in it, sew it off, right above the sand. then sew off the other side down a ways from the top, fill with sand. Then sew the opening shut.
|
|
|
Post by poorboy1 on May 26, 2010 22:03:27 GMT -5
that could work, how long will it take for you to make it?
|
|
|
Post by chevtech on May 27, 2010 0:56:38 GMT -5
Couple of baseballs or softball sewn in a tube sock should work, I can make one if need be.
|
|
|
Post by copenhagen on May 27, 2010 1:11:05 GMT -5
that could work, how long will it take for you to make it? i dont think ive ever sewed anything in my life. Im going to the beach saturday to dig some clams, ill grab some sand
|
|