Outlawford
trail master
GOT TUBE DOORS?
Posts: 552
|
OL'BLUE
Oct 21, 2010 21:24:13 GMT -5
Post by Outlawford on Oct 21, 2010 21:24:13 GMT -5
The vids didn't show much other than just off idle. Did it pull hard on full throttle and rev fairly high? At full throttle it pulls great. It runs better and harder than it did with my carb and gas. With 42 on it will get up a go if i can keep traction. The response from the pain compared to gasoline is way better. As for rev its tacs out quicker on pain i have not had a problem with it cutting out or poor performance yet.
|
|
|
OL'BLUE
Oct 22, 2010 19:46:21 GMT -5
Post by poorboy1 on Oct 22, 2010 19:46:21 GMT -5
Wheels are here. Only 73lbs each without all the bolts. See if I can get a pic uploaded.
|
|
Outlawford
trail master
GOT TUBE DOORS?
Posts: 552
|
OL'BLUE
Oct 22, 2010 20:00:58 GMT -5
Post by Outlawford on Oct 22, 2010 20:00:58 GMT -5
|
|
|
OL'BLUE
Oct 22, 2010 20:02:25 GMT -5
Post by poorboy1 on Oct 22, 2010 20:02:25 GMT -5
|
|
Outlawford
trail master
GOT TUBE DOORS?
Posts: 552
|
OL'BLUE
Oct 22, 2010 20:06:00 GMT -5
Post by Outlawford on Oct 22, 2010 20:06:00 GMT -5
Sweet!!! Orange will stand out Nice i like.
|
|
|
OL'BLUE
Oct 22, 2010 20:12:19 GMT -5
Post by poorboy1 on Oct 22, 2010 20:12:19 GMT -5
I have an mail into the company because they didnt send orings. I am thinking maybe due to the insert they do not need the oring? Hopefully they will get back to me. The way they drilled the valve stem it is possible that theymay not need it.
|
|
Outlawford
trail master
GOT TUBE DOORS?
Posts: 552
|
OL'BLUE
Oct 22, 2010 20:18:19 GMT -5
Post by Outlawford on Oct 22, 2010 20:18:19 GMT -5
Good timing i pulled off my 42 yesterday and put the 38 back on. I will work on getting broke down and set a time to get them on. Going to run the 38 until i get the 60 in the front.
|
|
|
OL'BLUE
Oct 22, 2010 21:07:17 GMT -5
Post by Buzzer on Oct 22, 2010 21:07:17 GMT -5
I have an mail into the company because they didnt send orings. I am thinking maybe due to the insert they do not need the oring? Hopefully they will get back to me. The way they drilled the valve stem it is possible that theymay not need it. Josh has 12 bolts too and still needs the o'ring
|
|
|
OL'BLUE
Oct 22, 2010 21:18:47 GMT -5
Post by poorboy1 on Oct 22, 2010 21:18:47 GMT -5
does josh run a plastic insert with the valve stem in the outer rim section?
|
|
|
OL'BLUE
Oct 22, 2010 21:19:55 GMT -5
Post by poorboy1 on Oct 22, 2010 21:19:55 GMT -5
i would think you would need it too but emailed them anyways.
|
|
|
OL'BLUE
Oct 22, 2010 21:38:00 GMT -5
Post by Buzzer on Oct 22, 2010 21:38:00 GMT -5
yes and has the magnesium run flats.. my 8 bolts have the PVC insert and still need the o'ring.
|
|
|
OL'BLUE
Oct 22, 2010 22:18:36 GMT -5
Post by Jonny tsunami on Oct 22, 2010 22:18:36 GMT -5
sweet!! the hummer beadlocks are nice I like mine alot. ;D Id say the only down side is allot of the fancy new tires coming out, its hard to get them in a 16.5 sometimes. yes, on those o rings, it seals the two rim half's together regardless of mag inserts or PVC.
|
|
|
OL'BLUE
Oct 23, 2010 0:07:48 GMT -5
Post by poorboy1 on Oct 23, 2010 0:07:48 GMT -5
Found the o-rings in the fourth unopened box. I have everything for them so Rich you have some kick ass wheels now.
|
|
|
OL'BLUE
Oct 23, 2010 0:09:07 GMT -5
Post by Buzzer on Oct 23, 2010 0:09:07 GMT -5
going to look damb SWEET!
|
|
Outlawford
trail master
GOT TUBE DOORS?
Posts: 552
|
OL'BLUE
Oct 23, 2010 0:33:18 GMT -5
Post by Outlawford on Oct 23, 2010 0:33:18 GMT -5
Found the o-rings in the fourth unopened box. I have everything for them so Rich you have some kick ass wheels now. Nice. Its always the last box. ;D
|
|