|
Post by 4wdfactorychris on May 21, 2010 16:34:54 GMT -5
Need a quote on a 1.75" 240* Pro-tools 105 tube bender die 6" CLR shipped to residential 97113. Thanks. PM sent. I'm waiting for them to tell me the shipping costs
|
|
|
Post by copenhagen on May 25, 2010 12:40:45 GMT -5
need a price on, two PN: MG20650B shipped to 97123, thx.
|
|
|
Post by 4wdfactorychris on May 25, 2010 17:14:11 GMT -5
need a price on, two PN: MG20650B shipped to 97123, thx. They are still about 3 weeks out. Let me know if you want another brand.
|
|
|
Post by copenhagen on May 26, 2010 4:12:03 GMT -5
Nah, I want to stick with them, Ive read a few threads about 10 factory, and they seem to be a real legit outfit. I like the 10 year warranty. Im not planning on buying them for a little while, just trying to get my budget in order
|
|
|
Post by 4wdfactorychris on May 26, 2010 9:21:18 GMT -5
Nah, I want to stick with them, Ive read a few threads about 10 factory, and they seem to be a real legit outfit. I like the 10 year warranty. Im not planning on buying them for a little while, just trying to get my budget in order Ten Factory is part of "Motive Gear" the largest supplier of axle parts next to Randy's R&P. Ten Factory is "Alloy USA" just under a different name.
|
|
cope
axle snapper
Dodge these nuts!
Posts: 206
|
Post by cope on Jun 3, 2010 18:45:55 GMT -5
I'm lookin for a u-bolt flip kit for a 93 toyota with a 4 inch block
|
|
|
Post by 4wdfactorychris on Jun 4, 2010 9:15:04 GMT -5
I'm lookin for a u-bolt flip kit for a 93 toyota with a 4 inch block If you can, measure how long & wide your u-bolts need to be. Also are you using stock width springs?
|
|
cope
axle snapper
Dodge these nuts!
Posts: 206
|
Post by cope on Jun 4, 2010 15:51:06 GMT -5
Yes stock width springs.the u-bolt width is 3 3/4 center to center and about 10 inch's long shipped to 97304 thanks cope
|
|
|
Post by 4wdfactorychris on Jun 4, 2010 16:49:05 GMT -5
Yes stock width springs.the u-bolt width is 3 3/4 center to center and about 10 inch's long shipped to 97304 thanks cope PM sent
|
|
|
Post by poorboy1 on Jul 6, 2010 13:30:54 GMT -5
Looking for a set of roll bar mount clamps for remote resivoir shocks.
|
|
|
Post by 4wdfactorychris on Jul 6, 2010 15:46:07 GMT -5
Looking for a set of roll bar mount clamps for remote reservoir shocks. The only thing I can get is the Ruff Stuff roll bar shock tabs that weld on. I don't know of any that are clamp style it would be difficult for that to hold up to the twist motion, unless you mount them vertical. I can get some ballistic tube clamps that you could weld some tabs onto if thats what your planning on doing. Let me know I'll get you some prices.
|
|
|
Post by poorboy1 on Jul 6, 2010 16:44:01 GMT -5
The clamps I'm after only hold the resivoir to the roll bar like what's on the front of my rig. I'll look for a pic when I get home.
|
|
|
Post by poorboy1 on Jul 7, 2010 0:58:24 GMT -5
|
|
|
Post by 4wdfactorychris on Jul 7, 2010 10:32:04 GMT -5
|
|
|
Post by blk01ram on Jul 14, 2010 6:25:27 GMT -5
Need a quote for (4)-42X15.0-16.5 Bias Pitbull Rockers shipped to 97113.
Read they were on backorder a couple of months ago, not sure about now. Figure shipping is going to suck, but if freight shipping to a depo is going to be cheaper, I could always pick them up from somewhere in Portland area.
|
|