|
trailer
Mar 14, 2008 15:19:23 GMT -5
Post by ReBeL on Mar 14, 2008 15:19:23 GMT -5
senc I broke my trailer on the recovery last sunday and dont look like i will have a new axel put in by the 29th mud bog. was woundring if any one that was not going could let me barow there trailer.
thanks
|
|
|
trailer
Mar 14, 2008 19:01:28 GMT -5
Post by popeye on Mar 14, 2008 19:01:28 GMT -5
how far from the property are you? maybe drop my truck off and go get yours
|
|
|
trailer
Mar 15, 2008 3:00:33 GMT -5
Post by ReBeL on Mar 15, 2008 3:00:33 GMT -5
i am not that far maybe i could tow bar it out and if i break I could barow your trailer to get it home popeye that would be kewl if nothing ells
|
|
|
trailer
Mar 15, 2008 11:09:21 GMT -5
Post by popeye on Mar 15, 2008 11:09:21 GMT -5
that works
|
|
|
trailer
Mar 15, 2008 13:29:23 GMT -5
Post by ReBeL on Mar 15, 2008 13:29:23 GMT -5
thanks man
|
|
|
trailer
Mar 15, 2008 14:02:09 GMT -5
Post by possumpieces on Mar 15, 2008 14:02:09 GMT -5
You can't fix the axel to use it one more time? It sounds like you have a short haul.
|
|
|
trailer
Mar 15, 2008 14:39:58 GMT -5
Post by The Black Jeep on Mar 15, 2008 14:39:58 GMT -5
Can you just put new inner and outer bearing and races in it with a new seal?
|
|
|
trailer
Mar 15, 2008 20:54:57 GMT -5
Post by ReBeL on Mar 15, 2008 20:54:57 GMT -5
yeah the trailer shop dont know what bearings i have. guss i could pull the other side any one know of a local bearing place close to clackamas
|
|
|
trailer
Mar 15, 2008 21:03:05 GMT -5
Post by possumpieces on Mar 15, 2008 21:03:05 GMT -5
There is a place called Aplied industrial, here in vancouver that deals with dementions instead of aplication. That's the place to go if it is hard to find or figure out. applied.findlocation.com Clackamas Location # 0494 14597 SE 82nd Dr Clackamas, OR 97015-9661 PH: (503) 652-2253 FAX: (503) 652-2198 Email: sc0494@applied.com
|
|
|
trailer
Mar 15, 2008 21:17:52 GMT -5
Post by ReBeL on Mar 15, 2008 21:17:52 GMT -5
not to make my self sound real bad but what would i do to get dementions
|
|
|
trailer
Mar 15, 2008 22:11:29 GMT -5
Post by The Black Jeep on Mar 15, 2008 22:11:29 GMT -5
On the bearings and the race, on the outside edge, should be some numbers. they are kinda hard to see, got to wipe the grease off and get light to hit it just right to read the numbers.
|
|
|
trailer
Mar 15, 2008 22:15:20 GMT -5
Post by ReBeL on Mar 15, 2008 22:15:20 GMT -5
i know how to get the #s i wanted to know how to do it like possum was saying
|
|
|
trailer
Mar 15, 2008 22:22:02 GMT -5
Post by The Black Jeep on Mar 15, 2008 22:22:02 GMT -5
Measure the outside diameter of the inner and outer race. and measure the inside diameter of the inner and outer bearing.
If you get the numbers off of the race and bearing, I can look them up for you.
|
|
|
trailer
Mar 15, 2008 22:45:38 GMT -5
Post by possumpieces on Mar 15, 2008 22:45:38 GMT -5
take the ones from the other side with you to they're store.
|
|
|
trailer
Mar 15, 2008 23:37:33 GMT -5
Post by Crusty on Mar 15, 2008 23:37:33 GMT -5
Just take it to a Les Schwab, they should be able to match them up and have them in stock.
|
|