68cj5
axle snapper
boom goes the dynamite
Posts: 170
|
Post by 68cj5 on May 28, 2012 17:24:04 GMT -5
im considering swapping my dana 44 from a 19spline to a 30spline mainly due to everyone having parts for the 30spline. what does this entail? new spiders and shafts or do i need new ring and pinion also? some mentioned a locker but im a little broke lol
|
|
|
Post by mudmaniac3 on May 28, 2012 17:40:45 GMT -5
when swapping to 30 spline axles its just the spider gears/locker if thats what you have. You could also change hubs to 30 spline if they aren't already for front rear is just the spider gears/locker change
|
|
68cj5
axle snapper
boom goes the dynamite
Posts: 170
|
Post by 68cj5 on May 28, 2012 17:46:40 GMT -5
ok i kinda figured but wasnt positive. and i am in no need of a locker as of right now not gettin to far out of the garage
|
|
|
Post by blueberry on May 31, 2012 19:22:07 GMT -5
yes thats what i did when i started with my 60 and if its in the rear its really easy to weld up also and i have some extra rear 30 spine axles also might even have a rear 60 carrier if you wanted to weld it up and see if you like it
|
|
68cj5
axle snapper
boom goes the dynamite
Posts: 170
|
Post by 68cj5 on May 31, 2012 21:10:13 GMT -5
hmmmm may have to consider that. i think i might have an issue though cuz im pretty sure my shafts are 2 piece and if i swap to a 30 spline i mine as well go 1 piece but i dont like throwin money around haha
|
|