|
Post by Leeland on Apr 16, 2012 23:21:31 GMT -5
Should have specified initial sorry. Could try backing it off a little and seeing if you gain any rpm, if it's too far advanced it won't spin up for poop. It won't always detonate unless hot and it'll be gutless up top.
|
|
|
Post by Leeland on Apr 16, 2012 23:23:32 GMT -5
Was the manifold vacuum steady or jumping around
|
|
|
Post by Rock Dawg on Apr 17, 2012 10:44:33 GMT -5
At 3,000 it's at 38 degrees because of the ported head, intake, an weber I would back it down to 32 degrees at 3K (to test for pre detination when hot) and look for a vaccum leak because of what your boost gauge is telling you.
|
|
|
Post by stefanh on Apr 17, 2012 23:37:41 GMT -5
Found out that one of the main causes is the accelerator pump Is shot so no power pretty much. So I need a weber 32/36 preferably a 38 cuz that's what motor is made for but it'll work
|
|
|
Post by stefanh on Apr 20, 2012 18:15:22 GMT -5
Well we figured it out after tearing the top end apart.. Didn't need to do that haha. The accelerator pump and the power pumpdiaphram were toasted slapped another 38 weber on it runs like a champ now
|
|