|
Post by poorboy1 on Mar 1, 2012 20:19:20 GMT -5
Well I got my test schedule for work and it is going to cut into build time alot in the coming months.
As of right now I will be working on the truck every weekend in the month of March with the exception of Sunday the 18th. My goal is to have the truck drivable/wheelable and hopefully tested by April 14th.
I am getting down to alot of nickle and dime repairs so having 10 people trying to work on it at once will get us nowhere. A couple/few could stay busy.
The crew that is going needs to get with me on what day this month we all can be here at the same time to go over things.
As for this weekend the plan is to weld up the steering supports,wire the winch, mount the fan shroud, plumb the oil gauge, install rear brake and plumbing. Install front carrier bearing mount. instal carrier bearing. Make mounts for skid plate. Make bump stop mounts. make rear brake skid plate.
|
|
|
Post by Buzzer on Mar 1, 2012 22:30:51 GMT -5
Out this weekend.. sorry... Have kid +1 and sunday a ball joint job to do..
|
|
|
Post by poorboy1 on Mar 12, 2012 20:09:08 GMT -5
Going to be in the shop on Saturday from about 8am till noon, then getting my Irish on! Most likely not Sunday, I gotta work. However the plan is to bust out an axle swap and get these Ouversons installed. Who ever comes out Saturday is welcome to hang out longer than noon, but problably wont be doing much work.
|
|
|
Post by Brennerbadboy on Mar 12, 2012 22:20:07 GMT -5
sorry have to pass this weekend, building a motor for $$$, cant pass it up
|
|
|
Post by Brennerbadboy on Mar 12, 2012 22:28:10 GMT -5
BEND SOME IRISH FOR ME
|
|
|
Post by Buzzer on Mar 13, 2012 9:41:38 GMT -5
I'd be up for it, but will have Emma in tow with me, as Jeanna works this weekend.
|
|
|
Post by chevyboy89 on Mar 13, 2012 12:12:32 GMT -5
I will be able to lend a hand
|
|
|
Post by Brennerbadboy on Mar 16, 2012 21:33:11 GMT -5
saw your 2010 front end in MAY FOURWHEELER
|
|